Tips for Reducing Radio Interference with a Drawtite Activator 5504 on a 2003 Ford F-250
Question:
I have this connected on my 2003 F-250 and it has recently started giving static over the radio when on when I step on the brake-no trailer attached. Do I have a bad ground or what? I have it connected thus: from brake controller: :to truck wiring under dash 1. dark blue to 1. dark blue trailer brake feed 2. red to 2. lt. green stop lamp brake controller 3. white to 3. white ground 4. black to 4. red brake control feed Thanks,
asked by: Paul J
Helpful Expert Reply:
I have heard of brake controllers interfering with AM radio signals if the controllers are installed to closely to the antenna. You may try moving the controller to a different location to see if that fixes the problem.
Or you could try insulating the controller with foil to stop the interference.
The interference you are experiencing should not be wiring related at all. It sounds like your controller is wired up correctly. The problem is most likely from the controller emitting an electronic frequency that is causing interference with the radio frequencies.
