Correct Replacement for 3,500 Lb Axle with 95" Hub Face
Question:
I have a 3500 Dexter axle 95inch hubface 78inch spring center do you have one or will the hubs of of my 3500 work on the 7000# axle you have
asked by: Jd A
Expert Reply:
The correct replacement 3,500 axle with 95" hub face measurement is the Dexter Trailer Axle Beam with E-Z Lube Spindles part # 7359765. The spring centers are 80" apart so you will need to remove them and tack weld new spring seats in the locations that you measured using part # TRSS238. Please note, the spring center is measured from the center of each seat.
The hubs are not the same for a 3,500 lb and 7,000 lb axle.
Products Referenced in This Question
Spring Seat for Typical 3,500-lb, Round Trailer Axles with 2-3/8" Diameter
- Trailer Leaf Spring Suspension
- Spring Seats
- Boat Trailer
- Camper
- Car Hauler
- Snowmobile Trailer
- Utility Trailer
- Round Axle - 2-3/8 Inch
- TruRyde
more information >
Product Page this Question was Asked From
Dexter Trailer Axle Beam with E-Z Lube Spindles - 95" Long - 3,500 lbs
- Trailer Axles
- Leaf Spring Suspension
- Easy Lube Spindles
- No Hubs
- 3500 lbs
- Spindles Only
- 80 Inch Long
- 95 Inch Long
- No Drop or Lift
- Dexter
more information >
Continue Researching
- Article: Most Popular Wheel Bearings
- Article: Pintle-Hitches
- Article: Trailer Wiring Diagrams
- Article: Trailer Tire Sizing
- Q&A: Correct Replacement for Quality 3500 Lb 95 HF 80 SC Trailer Axle
- Article: How to Adjust Your Trailer Brakes | The Ultimate Guide
- Article: How to Measure the Bolt Pattern of a Trailer Wheel
- Q&A: Replacement 3,500 Lb Dexter Axle D4518710
- Article: Double-Eye Trailer Suspension System Review
- Q&A: Replacement Grease Seals For TRP GS-1719DL
- Q&A: How to Check for a Bent Trailer Axle Spindle
- Q&A: Replacement Solution for Fulton Swing Away A60 Drum Brake Actuator
- Q&A: Replacement For A Truryde RVD-H-65535 Hub
- Q&A: Recommended 23" Long Gas Strut fo a Camper Door