Wheel Bearing Cap 1.988 Diameter
Question:
Hello, I need a dust cap that is 1.988 dia. with increased depth. Can you supply 1 3/8 crown heigth ? Thanks
asked by: James E
0
Expert Reply:
I recommend the TruRyde Grease Cap item # F001518. These grease caps are 1.988" Outer Diameter, have an overall height of 1.156" and a crown height of 0.94 inches. This is the largest crown height available in a 1.988 inch diameter.
expert reply by:
Jerred H
0
Products Referenced in This Question
Grease Cap - 1.988" Outer Diameter - Drive In
- Trailer Bearings Races Seals Caps
- Caps
- Standard Grease Cap
- 1.98 Inch O.D.
- TruRyde
more information >
Product Page this Question was Asked From
Grease Cap, 1.988" OD Drive In - Qty 2
- Trailer Bearings Races Seals Caps
- Caps
- Standard Grease Cap
- 1.98 Inch O.D.
- TruRyde
more information >
Featured Help Information
Miscellaneous Media
Continue Researching
- Article: Measuring a Trailer Tire
- Article: Trailer Wiring Diagrams
- Article: Most Popular Wheel Bearings
- Article: Trailer Tire Sizing
- Article: Replacing the Bearing, Races and Seals on a Trailer Hub
- Q&A: Recommended Replacement for Dometic Duo-Therm RV Air Conditioner
- Q&A: Availability of Coupler Lock With a 5/16 inch Pin Diameter
- Q&A: Do Trailer Hubs have a Speed Rating for Use on a Boat Trailer and Highway
- Q&A: Trailer Taillight Lens Recommendation to Replace AISTP2 85
- Q&A: Clips and Clamps to Attach Wires and Wiring Harnesses to the Bottom of a Trailer Frame
- Q&A: What Might Cause a Grease Cap to Keep Coming Off of the Hub Assembly On a Boat Trailer
- Q&A: How To Use Toyota TRD Pro 17 Inch Wheels With Hubs On a Dexter 3,500 Lb Axle
- Article: Double-Eye Trailer Suspension System Review
- Article: Wiring Trailer Lights with a 7-Way Plug (It's Easier Than You Think)