Replacement Dexter 3,500 lb Axle Trailer Hub with 5 on 4-1/2 inch Bolt Pattern
Question:
What is the replacement part for Dexter 8-268 hub 3,500 lb axle with a bolt pattern of 5 on 4-1/2 ? The hubs reads 8-268 and not 8-248.
asked by: Ernst Z
0
Expert Reply:
Since we know you have a Dexter hub with a 5 on 4-1/2 inch bolt pattern that fits a 3,500 lb axle the correct replacement hub would be the part # 84545BX that you referenced for an idler hub or the part # AKHD-545-35-EZ-K for a hub/drum for a brake setup.
expert reply by:
Jameson C
0
Products Referenced in This Question
Easy Grease Trailer Hub and Drum Assembly for 3.5K Axles - 10" - 5 on 4-1/2 - Pre-Greased
- Trailer Hubs and Drums
- Hub with Integrated Drum
- Easy Grease
- EZ Lube
- Pre-Greased
- L68149
- L44649
- For 3500 lbs Axles
- 1/2 Inch Stud
- 5 on 4-1/2 Inch
- 13 Inch Wheel
- 14 Inch Wheel
- 14-1/2 Inch Wheel
- 15 Inch Wheel
- etrailer
more information >
Product Page this Question was Asked From
Dexter Trailer Idler Hub Assembly for 3,500-lb Axles - 5 on 4-1/2
- Trailer Hubs and Drums
- Hub
- Standard
- L68149
- L44649
- For 3500 lbs Axles
- 1/2 Inch Stud
- 5 on 4-1/2 Inch
- 13 Inch Wheel
- 14 Inch Wheel
- 14-1/2 Inch Wheel
- 15 Inch Wheel
- 16 Inch Wheel
- 16-1/2 Inch Wheel
- Dexter
more information >
Continue Researching
- Q&A: How to Read the Lippert Components Axle Description Measurements
- Q&A: Recommended Replacement Grease Seal for 2014 Shorelander Boat Trailer
- Q&A: Trailer Grease Seal to Replace 127194TB
- Article: Trailer Wiring Diagrams
- Article: How to Charge a Dump Trailer Battery
- Q&A: Replacement Trailer Hub Assembly for Dexter 8-248 Hubs
- Article: How to Choose the Right Trailer Hitch Class
- Article: Trailer Maintenance Schedule
- Article: Most Popular Wheel Bearings
- Q&A: Raising Trailer with Welded On Torsion Axles
- Q&A: Should I Buy a Horse Trailer with Torsion Axles or Straight Axles with Leaf Springs
- Article: Wiring Trailer Lights with a 7-Way Plug (It's Easier Than You Think)
- Q&A: Distance From Hitch Pin Hole to Gusset on Curt Ball Mount C45112
- Article: Roadmaster Vehicle Specific Base Plates