Correct Replacement Hub For Jet Ski Trailer With BT150 Hub
Question:
Hello! I recently purchased a used jet ski trailer with a locked up hub. I pulled the hubs and measured the spindle to a circumference of 3 3/8 inches. Thats where I dead end! It has straight spindles but I cant seem to find any hubs with the same inner and outer bearings that fit this size spindle? The original hubs were stamped BT150, the trailer make is Hustler. Any help would be appreciated! Thanks
asked by: Kyle C
Expert Reply:
I would be happy to help!
Based on the BT150 stamped in your hub you will need the CE Smith Trailer Idler Hub Assembly # CE13315 which includes inner and outer bearings # L44649. This hub comes pre-greased and ready to install on the spindle of your Jet Skit Trailer making it a very easy option.
I included a video of the # CE13315 for you to take a look at.
Products Referenced in This Question
CE Smith Trailer Idler Hub Assembly w/ Case for 2.7K Axles - 5 on 4-1/2 - Galvanized - Pre-Greased
- Trailer Hubs and Drums
- Hub
- Pre-Greased
- Standard
- L44649
- L44649
- For 2700 lbs Axles
- 1/2 Inch Stud
- 5 on 4-1/2 Inch
- 13 Inch Wheel
- 14 Inch Wheel
- CE Smith
more information >
Replacement Trailer Hub Bearing - L44649
- Trailer Bearings Races Seals Caps
- Bearings
- Standard Bearings
- 1.063 Inch I.D.
- Bearing L44649
- Race L44610
- 3500 lbs Axle
- etrailer
more information >
Product Page this Question was Asked From
Dexter Trailer Idler Hub Assembly for 6,000-lb Axles - 6 on 5-1/2
- Trailer Hubs and Drums
- Hub
- Standard
- 25580
- 15123
- For 6000 lbs Axles
- 1/2 Inch Stud
- 6 on 5-1/2 Inch
- 16 Inch Wheel
- 16-1/2 Inch Wheel
- 17 Inch Wheel
- 17-1/2 Inch Wheel
- 18 Inch Wheel
- 18-1/2 Inch Wheel
- Dexter
more information >
Featured Help Information
Miscellaneous Media
Continue Researching
- Shop: CE Smith Trailer Idler Hub Assembly w/ Case for 2.7K Axles - 5 on 4-1/2 - Galvanized - Pre-Greased
- Shop: Adapter Rails for Curt 5th Wheel Hitch - Ford and Chevy/GMC Towing Prep Package
- Search Results: 16027
- Article: Printable Trailer Bolt Hole Pattern Template
- Article: Most Popular Wheel Bearings
- Shop: CE Smith Trailer Hub Assembly w/ Carrying Case for 2,700-lb Axles - 5 on 4-1/2 - Pre-Greased
- Shop: Bearing Buddy Bearing Protectors - Model 1980A-SS w/ Auto Check - Stainless Steel (Pair)
- Shop: Demco Trailer Coupler - Cast - Flat Plate Mount - eZ-Latch - Zinc - 2-5/16" Ball - 21,000 lbs
- Search Results: grease
- Shop: Dexter Trailer Idler Hub Assembly for 2,000-lb Axles - 5 on 4-1/2
- Shop: Easy Grease Trailer Idler Hub Assembly for 2K Axles - 5 on 4-1/2 - Galvanized
- Search Results: 12192tb
- Search Results: boat trailer hub
- Search Results: kodiak rotor
- Search Results: bearing buddy
- Q&A: Length of Hub For 2k Axles
- Search Results: 190706
- Video: FAQ Measuring Bolt Pattern
- Q&A: Replacement Bearing Kit for 1988 EZ Loader Trailer with BT 150/151 Straight Spindle
- Video: LubriMatic Tools - Grease and Lubricants - L11390 Review
- Q&A: Tips for How to Identify a Trailer Axle
- Q&A: Recommended Hub For Reliable BT150A Axle
- Q&A: How to Determine the Size of a Trailer Hub Assembly for Replacement
- Video: etrailer Trailer Hubs and Drums - Hub - AKIHUB-440-2-G-1K Review
- Q&A: Replacement Hubs for 2,700 lb Axle
- Video: Review of Dexter Trailer Hubs and Drums - Hub - 34822545BX
- Q&A: How to Determine Correct Replacement Hub For Jet Ski Trailer
- Video: Review of CE Smith Trailer Hubs and Drums - Hub - CE13311
- Video: CE Smith Trailer Hubs and Drums - Hub - CE13210 Review
- Video: TruRyde Trailer Bearings Races Seals Caps - Seals - RG06-090 Review