Determining Axle Length for 73 Inch Outside to Outside Frame Trailer
Question:
Hi I have a trailer frame that measure 73 inch outside to outside on frame. What size axles do I need would a 72 inch spring center axles work
asked by: Kyle O
Expert Reply:
Assuming you have an existing axle, the best way to determine the axle you need is by measuring from hub face to hub face. Once you have this measurement you can measure from the center of the leaf spring to the center of the other leaf spring to make sure there is a compatible replacement.
If you do not have an existing axle you will need to take in to account the width of the tires and wheels you intend to use as well as the spindle length. Start with the width of your trailer with fenders/wheel wells. Then subtract the widths of the wheels you plan to use and the lengths of the two spindles to find the axle tube length.
I have attached a helpful diagram to show where to take measurements on an existing axle.
Product Page this Question was Asked From
Continue Researching
- Article: Trailer Wiring Diagrams
- Q&A: Trailer Running Lights Do Not Work but Brake Lights and Turn Signals Do Work
- Article: Brake Controller 7- and 4-Way Installation Kit (ETBC7)
- Article: Brake Controller Installation: Starting from Scratch
- Article: Testing Trailer Brake Magnets for Proper Function
- Article: Troubleshooting 4 and 5-Way Wiring Installations
- Article: Troubleshooting Brake Controller Installations
- Q&A: Will The Curt Dinghy Wire Harness # C96JR Interfere With Activation Of A Blue Ox Patriot
- Q&A: Trailer Turn Signals Both Blink when Just Left Turn Signal is Activated
- Q&A: Trailer Lights Left Side Turn Signal and Brake Lights Not Working
- Q&A: Checking Trailer Lights Without Hooking Up to Vehicle?
- Q&A: Troubleshooting No Running Lights on Trailer but Turn Signals and Brake Lights Work
- Q&A: Parts Needed to Flat Tow 2023 Jeep Gladiator
- Article: Determining Trailer Tongue Weight