Top Hole Spacing and Hole Diameter of 721584 Leaf Spring Hanger
Question:
What is the center to center distance of the two mounting holes on top of the 721584 hanger, also what size are they?
asked by: Mark
0
Expert Reply:
The holes on top of the # 721584 Leaf Spring Hanger are 1-7/8 inches apart on center. The holes themselves are 9/16 of an inch in diameter.
Please note, the holes aren't meant for bolts, the spring hangers should be plug welded to the trailer frame.
expert reply by:
Mike L
0
Hole Spacing and Diameter 721584 Leaf Spring Hanger
(click to enlarge)
(click to enlarge)
Product Page this Question was Asked From
Front Hanger for 2" Wide Slipper Springs - 3-9/16" Tall - 9/16" Bolt Hole
- Trailer Suspension Parts
- Hangers
- Boat Trailer
- Camper
- Car Hauler
- Snowmobile Trailer
- Utility Trailer
- Slipper Springs - 2 Inch
- 9/16 Inch Diameter
- 3-3/4 Inch Tall
- Single Axle
- Tandem Axle
- Triple Axle
- etrailer
more information >
Featured Help Information
Miscellaneous Media
Continue Researching
- Shop: Front Hanger for 2" Wide Slipper Springs - 3-9/16" Tall - 9/16" Bolt Hole
- Video: etrailer Trailer Suspension - Leaf Spring Suspension - 721584 Review
- Shop: Curved Equalizer for 1-3/4" Double Eye Spring - 7-3/4" Long - 9/16" Hole
- Shop: Dexter E-Z Flex Equalizer Kit - Double-Eye Springs - Tandem Axle - 6,000 lbs
- Shop: Dexter Heavy-Duty Suspension Kit for Tandem-Axle Trailers - 1-3/4" Wide Double Eye Springs
- Q&A: Availability of Front Leaf Spring Hanger for 2 inch Wide Springs
- Video: Review of ABS Fasteners Trailer Leaf Spring Suspension - Equalizers - A2252CB-GALV
- Video: ABS Fasteners Curved Equalizer Installation
- Search Results: trailer connector
- Search Results: equalizer
- Search Results: axle stabilizer
- Search Results: suspension kit for tandem~axle trailers
- Q&A: Replacement Leaf Springs for Harbor Freight Folding Trailer
- Shop: Spring Seat for Typical 5,200-lb to 7,200-lb, Round Trailer Axles with 3" Diameter
- Shop: Single-Axle Trailer Hanger Kit for Double-Eye Springs - 1-1/2" Front, 7/8" Rear
- Shop: Single-Axle Trailer Hanger Kit for 2" Slipper Springs - 3-3/4" Tall Front
- Search Results: aps1
- Search Results: 721584
- Search Results: aps6se
- Video: MORryde Tandem Axle Trailer Suspension Upgrade Kit Installation
- Shop: Trailer Hitch
- Q&A: How to Tell If MORryde Rubber Equalizers Will Fit Trailer
- Article: Trailer Wiring Diagrams
- Article: How to Choose the Right Trailer Hitch Class
- Shop: Trailer Wiring
- Q&A: Trailer Suspension Hanger Kit for Slipper Springs and 38 inch Wheelbase
- Shop: Suspension Enhancement
- Article: Double-Eye Trailer Suspension System Review
- Video: Dexter E-Z Flex Suspension Kit Review and Installation
- Q&A: Is Bow in 3,500 lb Trailer Axle Enough Camber for Loaded and Unloaded Trailers
Explore Expert Info
![Our Expert]()
on Trailer Suspension Parts
on Trailer Suspension Parts
