Replacement Motor Home Axles, Hubs, And Wheels
Question:
I have a dual axle trailer and apparently the axles are matching mobile home axles. We’ve had this trailer since the early 80’s. I need to replace the hubs and wheels. The bearings are parts #4T-LM102949 and #4T-LM67048 both also have the letters NYN stamped on them. The seal I have here is #442109. Is this enough information? The trailer is out at my property and not here in town with me. If you need more info, I can get it this weekend. I’d like to avoid replacing the axles. We primarily use the trailer on the property and rarely on the road so I’m comfortable with the old axles.
asked by: Alex S
Expert Reply:
I understand that your primary use of this motor home will be on your property. If you had a traditional trailer this would not be an issue, but since you have a motor home we have some limitations to deal with first. Your motor home axle is not a standardized axle size. Due to this, your motor home axle does not have any replacement hubs available. Since motor home axles are not replaceable, by design, manufacturers did not design aftermarket hubs for them. As a result, we do not have a hub that fits your axle spindle. As a result, any solution will involve replacing the axles, hubs, and wheels.
If you would like for us to recommend those parts for you I will need additional information from you. I will need the following;
1 The hub face to hub face measurement.
2. The spring seat to spring seat measurement.
3. The axle capacity of your motor home.
Once we have this information we can recommend a axle, hub, and wheel combination. I have included a diagram that shows how to get the measurements we need.
Product Page this Question was Asked From
Dexter Trailer Hub and Drum Assembly - 5,200-lb and 6,000-lb Axles - 6 on 5-1/2 - Pre Greased
- Trailer Hubs and Drums
- Hub with Integrated Drum
- Pre-Greased
- 25580
- 15123
- For 5200 lbs Axles
- For 6000 lbs Axles
- 6 on 5-1/2 Inch
- 14-1/2 Inch Wheel
- 15 Inch Wheel
- 16 Inch Wheel
- 16-1/2 Inch Wheel
- Dexter
more information >
Continue Researching
- Shop: #42 E-Z Lube Spindle w/ Flange for 5.2K to 7K Trailer Axles - 2-1/4" Diameter
- Q&A: Replacing Mobile Home Trailer Hub With a Hub that is Compatible with Standard Rims and Tires
- Q&A: Availability Of Hub/Drum Kit With Brakes And Hardware Similar To Part BPH1206EPR
- Article: Most Popular Wheel Bearings
- Q&A: Replacement Recommendation for Dexter Axle 8-201 Hub Assembly on Older Horse Trailer
- Article: Breakaway Kit Installation for Single and Dual Brake Axle Trailers
- Article: Trailer Tire Sizing
- Q&A: Recommended Nev-R-Adjust Brakes for a 6k Dexter Axle
- Q&A: Replacement For A Truryde RVD-H-65535 Hub
- Q&A: Does Dexter Trailer Hub and Drum Assembly Include E-Z Lube and Standard Grease Cap
- Q&A: Can a Hub with Outer Bearing 15123 and LM67048 Both Fit Same Spindle
- Article: Testing Trailer Brake Magnets for Proper Function
- Article: Trailer Wiring Diagrams
- Article: Parts Needed to Add Electric Drum Brakes to a Trailer
- Article: How to Tell the Weight Rating of a Trailer Axle