Where Should Fifth Wheel Rail Kit Install in Ford F-150 with 5-1/2' Bed
Question:
I just bought an older camper from a guy that has only had it for a year. He bought it from a friend that was pulling it with a 2010 f 150 short bed. The man I bought it from removed the LILfoot rocker 15 k fifth wheel hitch. I would like to install this on my truck. It has all the hardware and universal frame brackets with it. My question is, where do I install the bed rails? Whats the measurement from the rear of the bed That I start? I know I will have to be careful pulling this with a short bed as the camper could get into the cab if I turn too sharp.
asked by: Doug F
Expert Reply:
When installing a fifth wheel rail kit you want to ideally put the center between the two rails right over the center of the truck's rear axle.
The Sidewinder is the only way to tow a trailer with a truck that has a 5-1/2 foot bed.
Sidewinders are pin box specific so you will first need to know what pin box you have now in order to pick out the correct one.
There should be a sticker or a stamping on the OEM pin box of the trailer that will list the pin box number that is on the trailer.
Once you figure out which pin box you have you can check the FAQ I attached that has a chart that shows the correct Sidewinder to get based on which pin box you have.
Product Page this Question was Asked From
Reese Universal Base Rails and Installation Kit for 5th Wheel Trailer Hitches - 10 Bolt
- Fifth Wheel Installation Kit
- Universal
- Above the Bed
- Reese
more information >
Featured Help Information
Instructions
Miscellaneous Media
Continue Researching
- Q&A: Does Truck with 6-1/2 ft bed Have to Use Slider Hitch for Turning Clearance with Fifth Wheel Hitch
- Q&A: What Is An OEM Prep Package And How Do I Know If I Have It
- Article: Brake Controller Installation for 2007 (New Body Style) - 2013 GMC Sierra and Chevy Silverado
- Article: Gooseneck to 5th Wheel Adapters
- Article: 5th Wheel Hitch Installation | The Ultimate DIY Guide
- Article: 4 Steps to Choosing Your 5th Wheel Pin Box
- Q&A: Will the Adapter Rails for Curt 5th Wheel Hitch's Work With Reese 16K 5th Wheel Hitch
- Q&A: How to Convert a Demco AutoSlide 5th Wheel Hitch to Fit in the Ford Factory Puck System
- Article: Fifth Wheel Trailer Hitch Information and Installation Tips
- Article: Adapters for Towing a 5th Wheel Trailer with a Gooseneck Hitch
- Q&A: Can Aftermarket Puck System Be Installed on a 2024 GMC Sierra 3500
- Article: Ram Trailer Tow Prep Package
- Q&A: Gooseneck Hitch Adapter Recommendation for the Demco Fifth Wheel UMS Rail Kit DM8551010
- Q&A: Installing Fifth Wheel Hitch Bed Rails in Truck with Bed Liner