Trailer Hub Seal for a Hub with Inner Bearing L44643
Question:
I need to replace the rear hub seal on my boat trailer. the hub is a 5 lug and the rear bearing that I replaced is an L44643. Is that enough info to help me find what Im looking for.
asked by: Jimmy P
Expert Reply:
The matching race for bearing # L44643 is # L44610. For this race and bearing combination the seal is # RG06-010. It has an inner diameter of 1.249 inches and an outer diameter of 1.983 inches. This is a set of double lip seals that provide a much better seal than a single lip.
If the L44643 bearing was the outer bearing then I will need to know the inner bearing to determine the correct seal.
![Michael H](https://images.etrailer.com/static/images/catg/people/324_tn.jpg)
Products Referenced in This Question
Replacement Race for L44643 and L44649 Bearings
- Trailer Bearings Races Seals Caps
- Races
- Standard Races
- 1.980 Inch O.D.
- Bearing L44643
- Bearing L44649
- Race L44610
- 2000 lbs Axle
- 3500 lbs Axle
- etrailer
more information >
Replacement Trailer Hub Bearing - L44643
- Trailer Bearings Races Seals Caps
- Bearings
- Standard Bearings
- 1.000 Inch I.D.
- Bearing L44643
- Race L44610
- 2000 lbs Axle
- etrailer
more information >
Double Lip Grease Seals (pair)
- Trailer Bearings Races Seals Caps
- Seals
- Grease Seals - Double Lip
- 1.249 Inch I.D.
- 1.983 Inch O.D.
- TruRyde
more information >
Product Page this Question was Asked From
- Trailer Bearings Races Seals Caps
- Seals
- Grease Seals - Double Lip
- 1.500 Inch I.D.
- 1.987 Inch O.D
- TruRyde
more information >
Continue Researching
- Article: Most Popular Wheel Bearings
- Q&A: Recommended U-Bolts And Plate For A 1-1/2" Wide Square Axle
- Article: How to Tell the Weight Rating of a Trailer Axle
- Article: Breakaway Kit Installation for Single and Dual Brake Axle Trailers
- Q&A: Cross Referencing 10-9 Replacement Grease Seals for Aliner Trailer
- Article: Replacing the Bearing, Races and Seals on a Trailer Hub
- Article: Tire TLC: How & When to Check Your RV/Trailer Tire Pressure
- Q&A: Timken Replacement Bearing Solution for Setup with Part Numbers L44649 471750 L44610
- Q&A: Bearing Kits For Lippert 3,500LB Trailer Axles
- Article: How to Accurately Measure Trailer Leaf Springs
- Article: Parts Needed to Add Electric Drum Brakes to a Trailer
- Q&A: What is Correct Replacement Grease Seal for Bearing # L44649
- Q&A: How to Tell if Trailer has a BT8 or BTR Spindle Installed
- Q&A: Spare Tire Recommendation for a Dual Jet Ski Trailer with 205 x 65 x 10 Load Range E Tires