Air Lift WirelessONE Compressor with Fail Error Code
Question:
My remote for my air suspension flashes fail whenever I try increasing pressure and my system is aired all the way up and will not go down. It goes all the way down if there is enough weight on the rear end.
asked by: Taylor P
Expert Reply:
We have spoken with Air Lift regarding the "FAIL" error message you are getting on the Air Lift Wireless Remote # AL73002 for your compressor system. They stated that if the remote is still working fine to inflate the bags and check their pressures, the error code is likely resulting from a couple different possible causes.
The first possible cause might simply be a loose ground connection on the system. I recommend checking to make sure that your ground is secure and then try re-joining the controller with the manifold just to ensure a good pairing.
Otherwise, they stated that this message can sometimes occur if the check or inflate button is pressed too quickly. In this case, the error message will show up but the unit will still work to inflate the air bags like normal.
If you still cannot clear this message from the monitor, please let me know and I will be happy to look into this further.
