Recommended Bearings Races and Seals for a 3/4 Inch Spindle
Question:
Looking for replacement bearings, races, seals for 3/4 inch spindle with 1.771 inch 45 mm race Outside diameter Do you have anything?
asked by: Peter
Helpful Expert Reply:
We definitely have replacements available for you. The bearing # LM11949 will have the inner diameter of 3/4" and will sit in the race # LM11910. This will have the outer diameter of 1.781", which is slightly larger than your current race, but should still fit. From there, the CE Smith Seals # CE16305A are designed for your 3/4" spindle.
Products Referenced in This Question
CE Smith Grease Seals - 10174VB - Single Lip - Qty 2
- Trailer Bearings Races Seals Caps
- Seals
- Grease Seals - Single Lip
- 1.000 Inch I.D.
- 1.78 Inch O.D.
- CE Smith
more information >
Replacement Race for LM11949 Bearing
- Trailer Bearings Races Seals Caps
- Races
- Standard Races
- 1.781 Inch O.D.
- Bearing LM11949
- Race LM11910
- 3000 lbs Axle
- etrailer
more information >
Replacement Trailer Hub Bearing - LM11949
- Trailer Bearings Races Seals Caps
- Bearings
- Standard Bearings
- .750 Inch I.D.
- Bearing LM11949
- Race LM11910
- 3000 lbs Axle
- etrailer
more information >
Product Page this Question was Asked From
Bearing Kit with Grease Cap for 1" BT8 Spindle, L44643 Inner/Outer Bearings, 34823 Seal
- Trailer Bearings Races Seals Caps
- Bearings
- Standard Bearings
- Bearing Kits
- Bearing L44643
- Race L44610
- 2000 lbs Axle
- 2500 lbs Axle
- etrailer
more information >
Featured Help Information
Miscellaneous Media
Continue Researching
- Q&A: Timken Replacement Bearing Solution for Setup with Part Numbers L44649 471750 L44610
- Article: Most Popular Wheel Bearings
- Article: Replacing the Bearing, Races and Seals on a Trailer Hub
- Article: Trailer Tire Sizing
- Q&A: How to Tell if Trailer has a BT8 or BTR Spindle Installed
- Q&A: Correct Bearings for AL-KO Axle On Palomino Pinto Trailer
- Q&A: Trailer Hub Replacement For Lippert Axle NV178936
- Q&A: Replacement Hub Assembly for Older Boat Trailer with 4 Bolt Pattern
- Article: Parts Needed to Add Electric Drum Brakes to a Trailer
- Q&A: Depth Measurement For Hubs That Fit A 1" Straight Spindle
- Q&A: Replacement Bearings and Hub for Malone MicroSport Trailer
- Article: Wiring Trailer Lights with a 7-Way Plug (It's Easier Than You Think)
- Article: Trailer Drum Brakes vs. Disc Brakes: Making the Decision
- Article: My Trailer Hitch Doesn't Fit