Which Hub And Drum Assembly Fits Timbren Axle-Less Suspension-3500lb ASR3500S04?
Question:
What is the spindle size for# ASR3500S04 or will it work with drum hub 8-247 ?
asked by: Mark S
Expert Reply:
The Timbren Axle-Less Trailer Suspension System - 4" Drop Spindle Only - 3,500 lbs # ASR3500S04 you were looking at uses the standard 3500lb axle bearing combination of # L68149 and # L44649.
Since this is the same bearing combination of your Dexter 8-247 hub it will fit perfectly, or you can replace them with the Dexter # 84546UC3-EZ.
If you do not already have braking assemblies you will also need the Electric Trailer Brake Kit - Self-Adjusting - 10" - Left and Right Hand Assemblies - 3,500 lbs # AKEBRK-35-SA.
I included videos of the products mentioned for you to take a look at.
![Samuel C](https://images.etrailer.com/static/images/catg/people/2240_tn.jpg)
Products Referenced in This Question
Dexter Trailer Hub & Drum Assembly for 3,500-lb Axles - 10" Diameter - 5 on 4-1/2 - Pre-Greased
- Trailer Hubs and Drums
- Hub with Integrated Drum
- Pre-Greased
- Standard
- L68149
- L44649
- For 3500 lbs Axles
- 1/2 Inch Stud
- 5 on 4-1/2 Inch
- 13 Inch Wheel
- 14 Inch Wheel
- 14-1/2 Inch Wheel
- 15 Inch Wheel
- Dexter
more information >
etrailer Electric Trailer Brakes - Self-Adjusting - 10" - Left/Right Hand Assemblies - 3.5K
- Trailer Brakes
- Electric Drum Brakes
- Standard Grade
- Self Adjust
- 10 x 2-1/4 Inch Drum
- 3500 lbs Axle
- etrailer
more information >
Replacement Trailer Hub Bearing - L44649
- Trailer Bearings Races Seals Caps
- Bearings
- Standard Bearings
- 1.063 Inch I.D.
- Bearing L44649
- Race L44610
- 3500 lbs Axle
- etrailer
more information >
Replacement Trailer Hub Bearing - L68149
- Trailer Bearings Races Seals Caps
- Bearings
- Standard Bearings
- 1.378 Inch I.D.
- Bearing L68149
- Race L68111
- 3500 lbs Axle
- etrailer
more information >
Product Page this Question was Asked From
Timbren Axle-Less Trailer Suspension - Standard Duty - 4" Drop - 4 Bolt Flange - 3,500 lbs
- Trailer Axles
- Rubber Spring Suspension
- Easy Lube Spindles
- No Hubs
- 3500 lbs
- Spindles Only
- Universal Fit
- Drop - 4 Inch
- Timbren
more information >
Featured Help Information
Instructions
Miscellaneous Media
Continue Researching
- Article: Trailer Wiring Diagrams
- Article: Trailer Lighting Requirements
- Q&A: Largest Recommended Wheel and Tire For Use With Timbren Axle-Less Trailer Suspension # A20RS545
- Q&A: Comparing Curt Echo And Tekonsha Prodigy RF Wireless Brake Controllers
- Q&A: What is the Height and Width of a 205/75-15 Tire on a 15 Inch Trailer Wheel
- Article: Where to Position the Trailer Axle?
- Q&A: Hubs with 5 on 5 Bolt Pattern that Will Fit a Timbren Axle-Less Suspension System
- Article: Trailer Tire Sizing
- Article: Trailer Maintenance Schedule
- Q&A: Is There a Way to Determine Lifespan of a Torsion Axle
- Article: Gooseneck to 5th Wheel Adapters
- Article: How to Measure Your Trailer Wheel Bolt Pattern
- Q&A: Dimension Drawing for the Timbren Axle-Less Suspension System # ASR3500S05
- Q&A: Does It Matter If the Spring Center and Hub Face Is Different When Replacing A Trailer Axle