Will a Weight Distribution System Stop My 2005 Nissan Armada Truck From Sagging
Question:
I have a 2005 nissan Armada and I am towing a 2006 Haulmark enclosed car hauler. I have partially load it, and when I hook it up, it s the rear end really low. Will installing this weight distribution kit level my truck? My truck has a towing capacity of 9100 lbs and the Tung weight can handle up to 800 lbs with a weight distribution kit installed... Can you guys help me?
asked by: Arnold
Expert Reply:
Yes, a weight distribution system will help keep your vehicle from sagging when hooked up. The spring bars of the weight distribution system work to transfer the load from the tongue of the trailer to the vehicle and trailer axles.
You will need to properly load your trailer so that the tongue weight is not too high and is within the limits of your towing system. This will also help keep your vehicle level. Generally your tongue weight should be within 10 to 15 percent of your gross trailer weight.
The Strait-Line Weight Distribution Hitch System, item # RP66074, is an excellent weight distribution system that will also help control sway in high wind and when large vehicles pass. Along with this system you will need a properly sized hitch ball, item # 19286 or # 63836 and a weight distribution shank, item # RP54970.
Products Referenced in This Question
2-5/16" Hitch Ball - 1-1/4" Diameter x 2-3/4" Long Shank - Chrome - 12,000 lbs
- Trailer Hitch Ball
- Trailer Hitch Ball
- Standard Ball
- Chrome-Plated Steel
- 2-5/16 Inch Diameter Ball
- 2-3/4 Inch Shank Length
- 1-1/4 Inch Diameter Shank
- 12000 lbs GTW
- Class IV
- Class V
- Draw-Tite
more information >
2-5/16" Hitch Ball - 1-1/4" Diameter x 2-3/4" Long Shank - Chrome - 14,000 lbs
- Trailer Hitch Ball
- Trailer Hitch Ball
- Standard Ball
- Chrome-Plated Steel
- 2-5/16 Inch Diameter Ball
- 2-3/4 Inch Shank Length
- 1-1/4 Inch Diameter Shank
- 14000 lbs GTW
- Class IV
- Class V
- Draw-Tite
more information >
Reese Weight Dist Shank - 12-1/4" Long - 2" Drop to 6-1/2" Rise - 1,500 lbs TW
- Accessories and Parts
- Weight Distribution Hitch
- Shanks
- Fits 2 Inch Hitch
- Round - 2 Inch Drop
- Trunnion - 1 Inch Drop
- Round - 5 Inch Rise
- Trunnion - 6 Inch Rise
- Reese
more information >
Product Page this Question was Asked From
Strait-Line Weight Distribution w/ Sway Control - No Shank - Trunnion Bar - 12K GTW, 1,200 lbs TW
- Weight Distribution Hitch
- WD With Sway Control
- Some Sway
- Shank Not Included
- Electric Brake Compatible
- Fits 2 Inch Hitch
- Fits 2-1/2 Inch Hitch
- Allows Backing Up
- 1000 lbs
- 1100 lbs
- 700 lbs
- 800 lbs
- 900 lbs
- Reese
more information >
Featured Help Information
Instructions
Miscellaneous Media
Continue Researching
- Article: Which Sway Control Hitch is Right For Your Trailer?
- Article: 2 Steps for Finding the Right Weight Distribution Hitch Size
- Article: How to Measure for Trailer Hitch Drop
- Article: 5 Things to Know About Weight Distribution Hitches
- Article: Determining Trailer Tongue Weight
- Q&A: Recommended Weight Distribution System for a 6,800 lbs 2019 Lance 2465 Travel Trailer
- Article: 5 Tips to Confidently Choose Your Weight Distribution Hitch
- Q&A: Installing a Brake Controller in 2014 Dodge Ram Pickup
- Q&A: Does The Curt True Course Allow The User To Adjust Its Sensitivity?
- Q&A: Can the Curt True Course Sway Controller Be Used With the New StabiliTrak Electronic Sway Control
- Q&A: Will Reese Weight Distribution System RP66131 Work for Trailer with 1,350 lbs Tongue Weight
- Article: Ball Mount Basics: Weight Capacity, Class, and Size
- Q&A: Will Brake Lights Flash When Using Curt True Course Sway Control
- Q&A: Determining The Correct Replacement Brake Assemblies For A 2021 Heartland Mallard M27