Parts Needed To Convert 1-3/4 Wide Brakes To 2-1/4 Wide Brakes On 3500lb Axle
Question:
is there a solution toconvert from 1 3/4 to 2 1/4 brakes?
asked by: Tom M
Expert Reply:
To use 2-1/4" wide Electric trailer brakes on your trailer that currently has 1-3/4" wide brakes you will need to replace your hub and drum assemblies.
Since your trailer has a 3500lb axle you would more than likely need the Dexter Trailer Hub and Drum Assembly for 3,500-lb E-Z Lube Axles - 10" Diameter - 5 on 4-1/2 # 84546UC3-EZ which uses the common 3500lb axle bearing combination of # L68149 and # L44649. This hub and drum assembly is designed specifically for 2-1/4" wide brake assemblies.
You will just want to make sure your axle uses the # L68149 and # L44649 bearing combination. The easiest way to do this is remove one of your current hubs and look for the bearing numbers stamped in the face of each bearing. If you find you have a different bearing combination just let me know.
For braking assemblies you would need the Electric Trailer Brake Kit # AKEBRK-35-SA which are correct for a 3500lb axle.
I included a video of the # 84546UC3-EZ for you to take a look at.
Products Referenced in This Question
Dexter Trailer Hub & Drum Assembly for 3,500-lb Axles - 10" Diameter - 5 on 4-1/2 - Pre-Greased
- Trailer Hubs and Drums
- Hub with Integrated Drum
- Pre-Greased
- Standard
- L68149
- L44649
- For 3500 lbs Axles
- 1/2 Inch Stud
- 5 on 4-1/2 Inch
- 13 Inch Wheel
- 14 Inch Wheel
- 14-1/2 Inch Wheel
- 15 Inch Wheel
- Dexter
more information >
Replacement Trailer Hub Bearing - L44649
- Trailer Bearings Races Seals Caps
- Bearings
- Standard Bearings
- 1.063 Inch I.D.
- Bearing L44649
- Race L44610
- 3500 lbs Axle
- etrailer
more information >
Replacement Trailer Hub Bearing - L68149
- Trailer Bearings Races Seals Caps
- Bearings
- Standard Bearings
- 1.378 Inch I.D.
- Bearing L68149
- Race L68111
- 3500 lbs Axle
- etrailer
more information >
Product Page this Question was Asked From
etrailer Electric Trailer Brakes - Self-Adjusting - 10" - Left/Right Hand Assemblies - 3.5K
- Trailer Brakes
- Electric Drum Brakes
- Standard Grade
- Self Adjust
- 10 x 2-1/4 Inch Drum
- 3500 lbs Axle
- etrailer
more information >
Continue Researching
- Article: Trailer Wiring Diagrams
- Article: How to Choose the Right Trailer Hitch Class
- Q&A: Brake Controller Wiring for Ford E-450 Motorhome
- Q&A: Wheel and Tire Recommendation For Jet Ski Trailer with Tire Size ST175/80R13
- Article: Most Popular Wheel Bearings
- Article: Parts Needed to Add Electric Drum Brakes to a Trailer
- Article: Brake Controller Installation: Starting from Scratch
- Article: Brake Controller 7- and 4-Way Installation Kit (ETBC7)
- Article: Trailer Tester Battery Replacement for Part Number 8010
- Q&A: 2022 Toyota Highlander Wiring for a 7-Way Blade Connector
- Q&A: Recommended Trailer for Two Titan Propel 12 Kayaks
- Q&A: Seal With Dimensions to Replace 171255UC
- Q&A: Size of WeatherTech Side Window Air Deflectors # WT82476 for 2014 Chrysler Town and Country
- Q&A: Troubleshooting Brake Override and Stop/Start Malfunction On 2022 Toyota Highlander Redarc Tow Pro