Where Is Trailer Running Light Fuse In 2013 Ram 1500?
Question:
I have a 2013 ram 1500 pickup I have no running lights on my trailer all other lights work I can not locate the fuse in the fuse Box for the running lights I test all the fuse in the Box they all good I test the wire from the plug on the back of the truck the Brown while have no power. I tested the F29 28 and20 fuse are all good, 7 pin clock wise to the right pin #5 is the own pin that have power. I need your help I have a food trailer I need my running lights.
asked by: Benny
Expert Reply:
I would be happy to help!
The trailer running light fuse in your 2013 Ram 1500 is fuse J14 in the engine bay fuse box, and is a 20 amp fuse.
If that fuse checks out, and you can verify power is making it through the fuse then you will need to trace the wire going out of the 7-way connector for the 11 o'clock pin as shown in the included diagram, and look for any damage or where it may have come loose.
You will need to replace any damaged sections with # 16-1-1 and heat shrink butt connectors # DW05744-5.
I included a link to a helpful article on wiring for you to take a look at.
Products Referenced in This Question
Deka Heat Shrink Butt Connector - 16-14 Gauge - Nylon Insulation - Blue - Qty 5
- Wiring
- Wire Connectors
- Butt Connectors
- 16-14 Gauge
- Deka
more information >
Product Page this Question was Asked From
Continue Researching
- Article: Trailer Wiring Diagrams
- Q&A: Trailer Running Lights Do Not Work but Brake Lights and Turn Signals Do Work
- Article: Brake Controller 7- and 4-Way Installation Kit (ETBC7)
- Article: Brake Controller Installation: Starting from Scratch
- Article: Testing Trailer Brake Magnets for Proper Function
- Article: Troubleshooting 4 and 5-Way Wiring Installations
- Article: Troubleshooting Brake Controller Installations
- Q&A: How to Make an Adapter to Go from Semi Truck 7-Way Round to RV Style 7-Way Blade on Trailer
- Q&A: Trailer Turn Signals Both Blink when Just Left Turn Signal is Activated
- Q&A: Trailer Lights Left Side Turn Signal and Brake Lights Not Working
- Q&A: Troubleshooting No Running Lights on Trailer but Turn Signals and Brake Lights Work
- Q&A: Parts Needed to Flat Tow 2023 Jeep Gladiator
- Q&A: Can the Curt Custom Tail Light Wiring Kit Be Used With LED Lights
- Article: Trailer Lighting Requirements