Determining If Trailer Idler Hub Assembly AKIHUB-440-2-EZ-2K Fits Road King Trailer W/ 1500lb Axle
Question:
My road king trailer part #46620a appears to have a 1500lb axle . Do you know if these hubs would still work. I have verified the bolt pattern etc Thank you!
asked by: John
Expert Reply:
It is possible that the Trailer Idler Hub Assembly for 2,000-lb E-Z Lube Axles - 4 on 4 - L44649 Bearings - Pre-Greased # AKIHUB-440-2-EZ-2K you were looking at will fit your Road King Trailer with 1500lb axle, but you will need to confirm the bearing combination your spindle uses to be sure.
To do this you will need to remove one of your hubs and look for the bearing numbers stamped in the face of each bearing as shown in the included picture of the # L44649.
The # AKIHUB-440-2-EZ-2K uses inner and outer bearing # L44649, so as long as this matches your current bearings this would be the correct part for you.
If you find your spindle uses a different bearing combination just let me know.
I included a video of the # AKIHUB-440-2-EZ-2K for you to take a look at.
![Samuel C](https://images.etrailer.com/static/images/catg/people/2240_tn.jpg)
Products Referenced in This Question
Replacement Trailer Hub Bearing - L44649
- Trailer Bearings Races Seals Caps
- Bearings
- Standard Bearings
- 1.063 Inch I.D.
- Bearing L44649
- Race L44610
- 3500 lbs Axle
- etrailer
more information >
Product Page this Question was Asked From
Easy Grease Trailer Idler Hub Assembly for 2K Axles - 4 on 4 - L44649 Bearings - Pre-Greased
- Trailer Hubs and Drums
- Hub
- Easy Grease
- EZ Lube
- Pre-Greased
- L44649
- L44649
- For 2000 lbs Axles
- 1/2 Inch Stud
- 4 on 4 Inch
- 8 Inch Wheel
- 10 Inch Wheel
- 12 Inch Wheel
- 13 Inch Wheel
- 14 Inch Wheel
- etrailer
more information >
Featured Help Information
Miscellaneous Media
Continue Researching
- Article: Trailer Tire Sizing
- Article: Most Popular Wheel Bearings
- Q&A: How to Tell if Trailer has a BT8 or BTR Spindle Installed
- Q&A: What is Difference Between Trailer Bearings L44649 vs L44643
- Article: Replacing the Bearing, Races and Seals on a Trailer Hub
- Article: 7 Common Questions Everyone Has About Trailer Tires
- Article: Trailer Wiring Diagrams
- Q&A: What Is the Difference Between a BTR and BT8 Spindle
- Q&A: What Tire Pressure Do I Use for the Loadstar K399 Bias Trailer Tire # AM1HP54?
- Q&A: Is Tire Weight Capacity Listed per Tire or Per Axle
- Article: Best Boat Trailer Jacks
- Q&A: Solution for Replacement Hubs on Northern Tool Ultra-Tow 49803 Aluminum Trailer
- Article: How to Measure Your Trailer Wheel Bolt Pattern
- Q&A: Torque Specs for Kenda 4.80-12 Bias Trailer Tire with 12 Aluminum Wheel