Recommended Replacement Axle For Axle With Obsolete L44649 and LM11949 Bearing Combination
Question:
5lug 4.5 bolt pattern 1 1/16 inner bearing and 3/4 outer bearing
asked by: JORGE D
Expert Reply:
I have a replacement axle option for you, but unfortunately we do not carry a hub that uses inner bearing # L44649 (1-1/16") and outer bearing # LM11949 (3/4"), and I was unable to find such a hub from any other vendors.
The best option is going to be replacing the axle with one that uses a more common bearing combination to make finding replacement parts now and in the future easier.
Based on the bearing combination you have your axle is more than likely a 2000lb axle but you will want to confirm this, and measure the axle hub face to hub face, and spring center to spring center.
You can verify the axle rating by checking the axle tag on the center of the axle, or if the tag is missing you can get a rough idea of the by finding the GVWR of the trailer and dividing it by the number of axles.
For example the Dexter Trailer Axle with Idler Hubs - 5 on 4-1/2 Bolt Pattern - 60" Long - 2,000 lbs # 20545I-ST-60-15 is a 2000lb axle with a 60" hub face to hub face measurement and a 48" spring center to spring center measurement as shown in the included diagram.
If you find your axle has a different axle rating or length just let me know.
I included a video of the # 20545I-ST-60-15 for you to take a look at.
Products Referenced in This Question
Dexter Trailer Axle with Idler Hubs - 5 on 4-1/2 Bolt Pattern - 60" Long - 2,000 lbs
- Trailer Axles
- Leaf Spring Suspension
- Standard Spindles
- Idler Hubs
- 2000 lbs
- 5 on 4-1/2 Inch
- 48 Inch Long
- 60 Inch Long
- No Drop or Lift
- Dexter
more information >
Replacement Trailer Hub Bearing - L44649
- Trailer Bearings Races Seals Caps
- Bearings
- Standard Bearings
- 1.063 Inch I.D.
- Bearing L44649
- Race L44610
- 3500 lbs Axle
- etrailer
more information >
Replacement Trailer Hub Bearing - LM11949
- Trailer Bearings Races Seals Caps
- Bearings
- Standard Bearings
- .750 Inch I.D.
- Bearing LM11949
- Race LM11910
- 3000 lbs Axle
- etrailer
more information >
Product Page this Question was Asked From
Dexter Trailer Idler Hub Assembly for 2,000-lb Axles - 5 on 4-1/2
- Trailer Hubs and Drums
- Hub
- Standard
- L44643
- L44643
- For 2000 lbs Axles
- 5 on 4-1/2 Inch
- 13 Inch Wheel
- 14 Inch Wheel
- 14-1/2 Inch Wheel
- 15 Inch Wheel
- Dexter
more information >
Continue Researching
- Q&A: What is The Outer Diameter of The Dexter Trailer Idler Hub Assembly # 8-258BTUC1?
- Q&A: Replacement Hub for Utility Trailer with Dexter 8-256 Hub
- Q&A: How to Determine the Size of a Trailer Hub Assembly for Replacement
- Q&A: Recommended Replacement Hubs for Harbor Freight Trailer
- Article: Replacing the Bearing, Races and Seals on a Trailer Hub
- Q&A: Upgrading Trailer Tires and Wheels For Highway use on Harbor Freight 4x8 Folding Trailer
- Q&A: Difference Between an Idler Hub and a Hub/Drum
- Article: 5 Tell-Tale Signs It’s Time to Replace Your Trailer’s Leaf Springs
- Article: 7 Common Questions Everyone Has About Trailer Tires
- Q&A: Grease Cap/Bearing Buddy Availability for Harbor Freight Utility Trailer
- Article: Trailer Tire Sizing
- Article: Most Popular Wheel Bearings
- Article: How to Measure Your Trailer Wheel Bolt Pattern
- Article: How to Accurately Measure Trailer Leaf Springs