Which Weight Distribution System for Trailer with C-Channel Frame and 5-600 lbs Tongue Weight
Question:
I have a 1977 20 ft travel trailer with approx 500 to 600lbs tongue weight depending on if I am carrying water or not. Looking for a weight distribution hitch. GWR on trailer is 5500obs. The main question I have is that the tongue has c channel instead of a boxed frame. What systems will work with the C channel? It is heavy channel just not sure about mounting options. I would rather not drill into the frame but I can if it is necessary. I am not worried about sway, the trailer tracks great just looking to get the weight distributed better. It is 20.5 inches to top of my truck hitch. 14.5 inches to bottom of coupler on trailer. It squats my truck about 1.5 inches when hooked up.
asked by: Erick J
Helpful Expert Reply:
I recommend the Fastway e2 Weight Distribution w/ 2-Point Sway Control - Round - 8,000 lbs GTW, 800 lbs TW # FA94-00-0800 for your trailer with 5-600 lbs of tongue weight.
This system has clamp on brackets so there is no need to drill. The integrated 2-point e2 sway control system will add to the stability of your trailer, is surge brake compatible, and allows you to back up the trailer without disengaging the hitch. The system will fit on your c-channel frame. However, you will need to place a block of wood or something similar between the bracket and frame on the open side.
I have attached an installation video for your reference.
Products Referenced in This Question
Fastway e2 Weight Distribution w/ 2-Point Sway Control - Round - 8,000 lbs GTW, 800 lbs TW
- Weight Distribution Hitch
- WD With Sway Control
- Some Sway
- Includes Shank
- Electric Brake Compatible
- Surge Brake Compatible
- Fits 2 Inch Hitch
- Allows Backing Up
- 500 lbs
- 600 lbs
- 700 lbs
- Fastway
more information >
Product Page this Question was Asked From
Blue Ox TrackPro Weight Distribution w/ Sway Control - 7-Hole Shank - 8K GTW, 800 lbs TW
- Weight Distribution Hitch
- WD With Sway Control
- Some Sway
- Includes Shank
- Electric Brake Compatible
- Surge Brake Compatible
- Fits 2 Inch Hitch
- Allows Backing Up
- 700 lbs
- Blue Ox
more information >
Featured Help Information
Instructions
Miscellaneous Media
Continue Researching
- Article: 5 Things to Know About Weight Distribution Hitches
- Q&A: Lighter Weight Spring Bars for the Blue Ox TrackPro Weight Distribution System
- Q&A: Comparing the Curt Q20 and the Curt A20 5th Wheel Hitches.
- Article: Which Sway Control Hitch is Right For Your Trailer?
- Q&A: Blue Ox SwayPro VS TrackPro Weight Distribution System
- Article: 2 Steps for Finding the Right Weight Distribution Hitch Size
- Q&A: Plug-In Wire Harness For A Redarc Brake Controller In A 2022 Jeep Wagoneer
- Q&A: How To Tell If Weight Distribution Hitch Is Installed Correctly
- Article: Determining Trailer Tongue Weight
- Q&A: Why is 1-1/8 Inch Socket Needed to Install Blue Ox TrackPro Weight Distribution System
- Q&A: Replacement Frame Mount Brackets for Fastway e2 Weight Distribution System
- Article: 5 Tips to Confidently Choose Your Weight Distribution Hitch
- Article: How to Measure for Trailer Hitch Drop
- Article: Ball Mount Basics: Weight Capacity, Class, and Size