How Tight Should Leg Nuts be Tightened on an Aluminum Wheel
Question:
What is the correct torque speck on these wheels
asked by: Paul W
0
Expert Reply:
The correct foot pounds of torque for the Westlake # LHAWSO513B will depend on which size lug bolt you have. As this is a 16 inch aluminum wheel, I have the torque ratings listed below:
1/2 inch coned lug nut - 90 to 100 ft-lbs
9/16 inch coned lug nut - 120 to 140 ft-lbs
expert reply by:
Lazer S
0
Product Page this Question was Asked From
Westlake ST235/80R16 Radial Tire w 16" Bobcat Aluminum Wheel - 8 on 6-1/2 - LR E - Black
- Trailer Tires and Wheels
- Tire with Wheel
- Radial Tire
- Load Range E
- 235/80-16
- 16 Inch
- L - 75 mph
- 8 on 6-1/2 Inch
- Aluminum Wheels
- Boat Trailer Wheels
- Westlake
more information >
Continue Researching
- Q&A: Replacement Trailer Wheel for Dexstar Wheel 17-293
- Q&A: Replacement 16 Inch Wheel Recommendation for Lionshead Lynx Silver Wheel with 8 Lug Pattern
- Q&A: How To Find Correct Replacement Taillight for Winnebago Minnie Winnie
- Article: Anti-Rattle Devices
- Q&A: Lift Kit for 2021 Grand Design Reflection 150 Series 268BH 5th Wheel w/ Dexter 4400 axles
- Q&A: Brake Assemblies for Dexter 10,000 lbs Axles
- Q&A: Replacement Recommendation for AL-KO 12-1/4" Electric Brakes
- Article: Brake Controller 7- and 4-Way Installation Kit (ETBC7)
- Q&A: Can 17.5 Inch Tires and Wheels be Used in Place of 16 Inch on a Gooseneck Trailer
- Article: Towing a Trailer? Let's Talk About Brake Controllers
- Article: 4 Steps to Choosing Your 5th Wheel Pin Box
- Article: How Much Does a Boat and Trailer Weigh?
- Article: How to Service An RV Air Conditioner
- Article: Trailer Tire Sizing