Is 84656UC3-EZ 10 Inch Hub Drum a Direct Replacement for Dexter 8-247
Question:
My Wells Cargo trailer has Dexter 8-247 5 on 4.5. I want to replace with 6 on 5.5 hub. It appears that 84656UC3-EZ will work. Before ordering I would like confirmation. I will need 4.
asked by: Rick H
Expert Reply:
You are correct. The # 84656UC3-EZ hub/drum you'd looked at with the 6 on 5-1/2 inch bolt pattern uses the same L44649 outer/L68149 outer wheel bearings and 10-19 grease seal as the 8-247 hub/drum like the
# 8-247-50UC3-EZ you'd looked at. Since the inner and outer bearings and ID of the grease seal match up, the # 84656UC3-EZ would be a compatible replacement.
Products Referenced in This Question
Dexter Trailer Hub and Drum Assembly for 3,500-lb E-Z Lube Axles - 10" Diameter - 6 on 5-1/2
- Trailer Hubs and Drums
- Hub with Integrated Drum
- EZ Lube
- L68149
- L44649
- For 3500 lbs Axles
- 1/2 Inch Stud
- 6 on 5-1/2 Inch
- 13 Inch Wheel
- 14 Inch Wheel
- 14-1/2 Inch Wheel
- 15 Inch Wheel
- 16 Inch Wheel
- 16-1/2 Inch Wheel
- Dexter
more information >
Product Page this Question was Asked From
Dexter Trailer Hub and Drum Assembly - 3,500-lb E-Z Lube Axles - 10" - 5 on 4-1/2 - Galvanized
- Trailer Hubs and Drums
- Hub with Integrated Drum
- EZ Lube
- L68149
- L44649
- For 3500 lbs Axles
- 1/2 Inch Stud
- 5 on 4-1/2 Inch
- 13 Inch Wheel
- 14 Inch Wheel
- 14-1/2 Inch Wheel
- 15 Inch Wheel
- Dexter
more information >
Featured Help Information
Miscellaneous Media
Continue Researching
- Q&A: Replacement Hub and Brake Assemblies that Fit Sure Trac 3,500 lb Axle
- Article: Parts Needed to Add Electric Drum Brakes to a Trailer
- Q&A: Pros And Cons For Switching From Electric To Electric Over hydraulic Disc Brakes On Trailer
- Article: Most Popular Wheel Bearings
- Q&A: What Info Is Needed to Pick Out Disc Brake Kit for Venture VATB 5925
- Article: How to Measure the Bolt Pattern of a Trailer Wheel
- Q&A: What is MTI Number of Dexter Hub # 84546UC3-EZ
- Q&A: Replacement Hub/Drum and Hydraulic Brake Assembly for Boat Trailer With 3,500 lb Axle and 13" Wheels
- Q&A: Will Demco Hydraulic Brake Kit Fit 13" Wheels
- Article: How to Adjust Your Trailer Brakes | The Ultimate Guide
- Q&A: Can Bearing Buddy Fit on EZ Lube Spindle that has Zerk Fitting
- Article: How to Install E-Track in 3 Easy Steps
- Article: Replacing the Bearing, Races and Seals on a Trailer Hub
- Article: Wiring Trailer Lights with a 7-Way Plug (It's Easier Than You Think)