Distance from Pin Hole Center to End of Bar on Reese Weight Distribution Shank RP63971
Question:
What distance is the hitch pin hole to the end of the hitch ? I currently have the 63970 shank and I cannot use the 1500lbs hole because the shank is touching the spare tire mounted behind the receiver on my Kia Borrego 2009.
asked by: Daniel C
1
Helpful Expert Reply:
I pulled one of the # RP63971 weight distribution shanks from our warehouse to measure, and the distance from the center of the pin hole to the rear edge of the shank is 4 inches. I am including a picture showing the measurements I took while I had the shank available.
expert reply by:
Sarah L
1
Product Page this Question was Asked From
Pro Series Weight Distribution Shank - 14" Long - 4-3/4" or 6-1/2" Drop - 1.5K TW
- Accessories and Parts
- Weight Distribution Hitch
- Shanks
- Fits 2 Inch Hitch
- Round - 6 Inch Drop
- Trunnion - 4 Inch Drop
- Pro Series
more information >
Continue Researching
- Shop: Pro Series Weight Distribution Shank - 14" Long - 4-3/4" or 6-1/2" Drop - 1.5K TW
- Shop: Reese Weight Dist Shank - 12-1/4" Long - 2" Drop to 6-1/2" Rise - 1,500 lbs TW
- Shop: Reese Weight Distribution Shank for 2" Hitches - 9 Hole Adjustment - 1,200 lb TW
- Shop: Trailer Wiring
- Shop: Fastway e2 Weight Distribution Shank - 12" Long - 7-3/4" Rise, 5-1/4" Drop - 1.2K TW
- Q&A: Dimensions of the Convert-A-Ball Cushioned Weight Distribution Shank # AMAC1
- Shop: Equal-i-zer Wt Distribution Shank - 12" - 13" Rise, 9" Drop - 600 to 1,400 lbs TW
- Shop: Convert-A-Ball Cushioned Weight Distribution Shank for 2" Hitches - 10,000 lbs
- Shop: Equal-i-zer Weight Dist Shank - 2-1/2" Hitch - 10" Rise/6" Drop
- Search Results: heat shrink butt connector
- Video: TruRyde Double-Eye Springs Curved Equalizer Installation
- Search Results: equalizer
- Search Results: dump trailer battery
- Q&A: Cushioned Equalizer Kit for a Tandem Axle Trailer Trailer with 5200 Pound ALCO Axles
- Search Results: battery
- Search Results: 54970
- Search Results: curved equalizer
- Search Results: 2" hitch
- Article: Double-Eye Trailer Suspension System Review
- Article: How to Charge a Dump Trailer Battery
- Shop: Trailer Hitch
- Shop: Camper Tie-Downs
- Q&A: Shank Recommendation with 2 More Inches of Drop Than RP54970
- Shop: Vehicle Sway Bars
- Q&A: Weight Distribution Shank Recommendations to go from Porsche Cayenne to Ford Expedition
- Q&A: Recommended Weight Distribution Hitch For Trailer W/ 440lbs TW, and Trailer W/550lbs TW
- Q&A: Bumper Clearance of Shank Included with Reese RE34FR Weight Distribution System
- Q&A: How Much Drop Does the Reese 3357 Weight Distribution Shank Provide
- Video: Trailer Wiring Harness Installation - 2006 Ford F-350 HM40975
- Video: Reese Weight Distribution Shank Installation - 2013 Ram 1500