Does Trailer Spring Seat Need to be Welded to Axle
Question:
Hi, I have put a new axle 3500lbs onto my small trailer 3.5*5 feet trailer. Do I need to weld the perch onto the axle or should the u-bolts be enough? The trailer is quite light, probably about 500lbs including cargo when driving.
asked by: Magnus
0
Expert Reply:
You do want to weld the spring seat of your axle to it. If you are in need of a spring seat for a 3,500 lb axle you'd want the part # TRSS238 and you'd be set.
expert reply by:
Jameson C
0
Product Page this Question was Asked From
Spring Seat for Typical 3,500-lb, Round Trailer Axles with 2-3/8" Diameter
- Trailer Leaf Spring Suspension
- Spring Seats
- Boat Trailer
- Camper
- Car Hauler
- Snowmobile Trailer
- Utility Trailer
- Round Axle - 2-3/8 Inch
- TruRyde
more information >
Continue Researching
- Search Results: leaf springs
- Shop: Step Bolt For Double Eye Springs - 9/16" Diameter - Plain - 3" Long
- Shop: 3-Leaf Slipper Spring w/ Flat End for 2,900-lb Trailer Axles - 30" Long
- Shop: Spring-Eye Bolt with Locknut for Slipper Springs - 4" Long
- Shop: 2-Leaf Slipper Spring w/ Flat End for 1,800-lb Trailer Axles - 30" Long
- Shop: CE Smith U-Bolt Kit for Mounting 2" Square Trailer Axles - 4-1/2" Long U-Bolts - Zinc
- Shop: 1-1/2" Square Trailer U-Bolts (Qty 2)
- Q&A: Do Trailer Leaf Springs All Have Bushings
- Shop: Dexter Trailer Axle w/ Idler Hubs - E-Z Lube - 5 on 4-1/2 Bolt Pattern - 95" Long - 3,500 lbs
- Search Results: leaf spring
- Shop: Trailer Wiring
- Search Results: 3500 lb trailer axle
- Shop: Trailer Hitch
- Shop: Van Cargo Mat
- Video: Review of TruRyde Trailer Spindles - EZ Lube Spindle - TRU74FR
- Q&A: Is Bow in 3,500 lb Trailer Axle Enough Camber for Loaded and Unloaded Trailers
- Q&A: Which is Better an EZ Lube Spindle or a Bearing Buddy Setup
- Video: MORryde Standard Frame Hanger X-Factor Crossmember Review
- Video: MORryde Stock Leaf Spring Suspension X-Factor Dropdown Crossmember Install - Travel Trailer
- Video: Review of MORryde X-Factor Crossmember For Standard Frame Hangers - MR33WR
- Q&A: Can MORryde Crossmembers Be Fitted With Roadmaster Comfort Ride Suspension System?
- Q&A: MORryde X-Factor Crossmember End Dimensions
- Q&A: No Power To Reverse Lights On Trailer
- Search Results: 15" wheel
- Q&A: Is It Required The Spring Seat Be Welded to Trailer Axle
- Article: How to Measure a Trailer Axle
- Article: How to Tell the Weight Rating of a Trailer Axle
- Search Results: 3" diameter axles
- Search Results: trailer alignment kit
- Search Results: dexter 4000 lb axle