Westin HDX Grille Guard Hardware for 2009 Dodge Ram 2500

Question

Question:

I have a black steel Westin HDX with punch plate for a 2009 Dodge Ram 2500 Megacab can you please tell me what is the replacement mounting brackets and hardware. Thank you

asked by: Humberto S

0

Expert Reply:

For the Westin HDX grille guard with punch plate that fits your 2009 Dodge Ram 2500 part # 57-1950 the correct hardware kit is the # 57-195PK.

expert reply by: Jameson C

0

Answer 1

As long as the Westin HDX grille guard you have came off of a 2006 Dodge Ram 2500 similar to yours you can use the hardware kit part #57-195PK but otherwise if it came from a different truck you'd need an all new grille guard since the hardware…

view full answer...

Answer 2

Since the correct Westin HDX Grille Guard for your 2008 Dodge Ram 1500 is part #57-1950 the correct hardware kit would be the part #57-195PK. If this is the hardware kit you tried already that would indicate that the guard you have was designed for a…

view full answer...

Answer 3

Thanks for reaching out! The first thing I'd do in your situation is make sure the grille guard part number you received is what that website has listed to fit your 2019 Ram 2500. For example, the Westin HDX Modular Grille Guard with Punch Plate…

view full answer...

Answer 4

The 40 amp fuse for your 2006 Chevrolet Silverado tow package is used for the 12 volt battery charge circuit. This fuse is located toward the front of the underhood fuse box closest to the front auxiliary positive post (see photo). There may be a…

view full answer...

Answer 5

On a 2005 Chevy Silverado 1500, If you are facing the front of the truck looking at the power distribution box, there will be a post at the back left side and a fuse slot near it. It is that fuse slot that you will install a 30 amp fuse. I have…

view full answer...

Answer 6

For your enclosed trailer application I have several suggestions for adding interior lighting that you can control directly via a switch. Since your current 4-pole trailer wiring does NOT include a 12V auxiliary power feed that could power inside…

view full answer...

Answer 7

The only way you could power interior dome lights on a trailer without it being connected to a tow vehicle would be to power the lights with a battery like a breakaway battery. How you choose to wire up the batteries will in the end be up to you, but…

view full answer...

Answer 8

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

view full answer...

Answer 9

You will need the Red LED Trailer Clearance or Side Marker Light #328-K-52 or Amber LED Trailer Clearance or Side Marker Light #328-K-51 for your 2018 Forest River Sunseeker motorhome. These lenses have the same Top Command SAE-AP2-16 markings on the…

view full answer...

Answer 10

It sounds like the purpose of getting the air helper spring would be to counteract the 1 inch compression you're getting in your rear suspension caused by the pin weight of your 5th wheel. If that's the case, I believe that the AirLift 5000…

view full answer...

Westin HDX Grille Guard Hardware for 2009 Dodge Ram 2500

Products Referenced in This Question

Product Page this Question was Asked From

Featured Help Information

Instructions

Continue Researching