How To Find Correct Bearings for Cobra Flagstaff Trailer Trailer
Question:
I have a 1995 Flagstaff 176ED by cobra. Id like to replace the bearings but cant find the spec for the size. The wheels are a 4 on 4 pattern. Thanks for any help you can provide.
asked by: David W
0
Expert Reply:
The easiest way to find the correct bearings for a trailer without pulling the hub is by determining the axle capacity, there's usually a tag on the actual axle with this info. The smaller trailers usually use the Bearing Kit, L44649 Inner/Outer Bearings part # BK1-150 which is common on 2,000-2,200 lb axles. If this is not what you have let me know.
expert reply by:
Conner L
0
Product Page this Question was Asked From
Bearing Kit, L44649 Inner/Outer Bearings, 10-9 Seal
- Trailer Bearings Races Seals Caps
- Bearings
- Standard Bearings
- Bearing Kits
- Bearing L44649
- Race L44610
- 2200 lbs Axle
- etrailer
more information >
Continue Researching
- Article: Most Popular Wheel Bearings
- Article: Replacing the Bearing, Races and Seals on a Trailer Hub
- Article: Trailer Tire Sizing
- Q&A: How to Determine Replacement Trailer Wheel Bearing Sizes
- Article: Trailer Wiring Diagrams
- Q&A: Are Bearings L44549 and L44649 Interchangeable
- Article: How to Measure the Bolt Pattern of a Trailer Wheel
- Q&A: Recommended U-Bolts And Plate For A 1-1/2" Wide Square Axle
- Q&A: Timken Replacement Bearing Solution for Setup with Part Numbers L44649 471750 L44610
- Article: How to Tell the Weight Rating of a Trailer Axle
- Q&A: Cross Referencing 10-9 Replacement Grease Seals for Aliner Trailer
- Q&A: How to Tell if Trailer has a BT8 or BTR Spindle Installed
- Q&A: What is Difference Between Trailer Bearings L44649 vs L44643
- Article: Double-Eye Trailer Suspension System Review