Replacement Brakes and Suspension Parts for 2015 Coachmen Freedom Express 246RKS
Question:
Hello, I just bought a used 2015 Coachmen Freedom Express 246RKS and am trying to find parts, upgraded equalizer kit, brakes, bearings ect. Haven’t seen any parts for that model on your site do you sell parts for this trailer?
asked by: Eric
Expert Reply:
These parts are not going to be trailer specific and will instead be tied to the specs on the axles; it looks like this trailer has tandem 3500-lbs axles, so the brakes would be fairly straightforward and you'd want to use the # AKEBRK-35-SA. These brakes are designed to fit in the 10" drums that are typically found on 3500-lbs axles. The rest of the parts, however, you would need to take apart some things and take some measurements.
To replace the bearings you would need to determine what bearings are in your hubs and if you want to replace the hubs you'll also want to provide the bolt pattern they currently have. You'll also want to take measurements of your equalizer from bolt hole to bolt hole (side to side), and the overall height, as well as the length of the springs without a load on them. If you can provide this information I can help you locate the rest of the parts you're looking for and get your new trailer back on the road.
Product Page this Question was Asked From
etrailer Electric Trailer Brakes - Self-Adjusting - 10" - Left/Right Hand Assemblies - 3.5K
- Trailer Brakes
- Electric Drum Brakes
- Standard Grade
- Self Adjust
- 10 x 2-1/4 Inch Drum
- 3500 lbs Axle
- etrailer
more information >
Continue Researching
- Article: Trailer Wiring Diagrams
- Article: Parts Needed to Add Electric Drum Brakes to a Trailer
- Article: Most Popular Wheel Bearings
- Article: Wiring Trailer Lights with a 7-Way Plug (It's Easier Than You Think)
- Article: Testing Trailer Brake Magnets for Proper Function
- Q&A: Parts Needed To Add Electric Drum Brakes To A Pontoon Trailer
- Article: Trailer Tire Sizing
- Article: How to Tell the Weight Rating of a Trailer Axle
- Q&A: How to Measure to Determine the Size Trailer Brakes Needed For Hydraulic Drum Replacement
- Q&A: Can Electric Brakes be Used on a Boat Trailer
- Q&A: Replacement Hub and Brake Assembly for AL-KO 8490
- Q&A: Replacement Trailer Brake Assemblies with Axletek-10-GG On Assemblies
- Q&A: Replacement Hub and Brake Assemblies that Fit Sure Trac 3,500 lb Axle
- Q&A: Recommended U-Bolts And Plate For A 1-1/2" Wide Square Axle