Installation of Furrion Soundbar in 2021 Leprechaun 298KB

Question:

I need to know what to connect in the main cabin of my RV. We have 40inch LED Furrion TV. I do not need to know what the wire pack is, but rather, where and how to I connect to the cabin power to turn this Soundbar on? What do I connect the Power lead to?

asked by: Debbie T

Expert Reply:

You will need to provide a 12 volt power source for the Furrion # FSB2N25MCBL soundbar. In some cases you may be able to tap into the wiring of a nearby 12 volt device assuming that circuit has adequate amperage available. If your TV is 12 volt then you may have power right there.

You could optionally run a new wire to your RV's power center if you have an available 12 volt fused circuit available. You could also run a line to the RV's coach battery making sure to use an inline fuse to protect the circuit. Use a 7.5 amp fuse and wire that is at least 16 gauge. Also the ground must be connected to a grounded part of the RV frame, or frame connected steel parts.

I highly recommend that you use an experienced service person to perform this installation.

expert reply by: Les D