RhinoFLEX and RhinoEXTREME adapters the same?

Question

Question:

I have a RhinoFLEX kit and need a replacement hose, and I was curious if the adapters I already have would work with a RhinoEXTREME hose.

asked by: Adam

0

Expert Reply:

The current versions of RhinoFLEX and RhinoEXTREME waste water parts use matching connectors. If you need a RhinoEXTREME hose you can order the Camco # CAM39863 which will get you a 10' hose that compresses about 50% for storage.

I have also included a link to our other Rhino products.

expert reply by: Les D

0

Answer 1

The RhinoEXTREME RV Sewer Hoses w Swivel Fittings, #CAM39867 is two 10' long hoses with a compressed length of about 54" and 3" diameter. For storing these, I recommend the Valterra RV Sewer Hose Carrier that adjusts from 34" to…

view full answer...

Answer 2

The max length of a compressed hose that could fit in the Valterra EZ RV Sewer Hose Carrier #A04-0150XBK is 26 inches. The inner diameter is 4-3/8 inches. This carrier is designed to fit the style of hoses that use the bayonet fittings.

view full answer...

Answer 3

The Valterra Carrier #A04-3460BK tube can telescope from 34-60 inches to accommodate a variety of hose lengths. Since 10 feet of just the RhinoFLEX Hose #CAM39671 compresses to 32 inches you will need a bigger hose carrier. I recommend going with the…

view full answer...

Answer 4

Since you have a wheelbase/axle spacing of 38 inches the correct hanger kit for slipper springs would be the part #HAP-105-205-01. And then for a 7k trailer axle the u-bolt kit you'd want would be the part #APUBR-8. I attached the diagram to use…

view full answer...

Answer 5

You will need the Red LED Trailer Clearance or Side Marker Light #328-K-52 or Amber LED Trailer Clearance or Side Marker Light #328-K-51 for your 2018 Forest River Sunseeker motorhome. These lenses have the same Top Command SAE-AP2-16 markings on the…

view full answer...

Answer 6

I've never heard of an actual third brake light connector on a camper shell to plug in on a truck and we don't carry any parts to do that. The light generally needs to be hardwired into the truck's brake light circuit. The issue with this…

view full answer...

Answer 7

I did some checking and the hub/drum we offer that will work for you is the part #8-430-5UC3. This uses the same bearings as the 8-415 and will be an exact fit aside from the fact this is a non-ABS setup and the 8-415 came in an ABS setup and non-ABS…

view full answer...

Answer 8

So I have your hub narrowed down to a few different possibilities but we need to know what your bolt pattern is to know for sure. We have the part #84556UC3 for if your bolt pattern is 5 on 5 inch. We have the part #845476UC3 for if your bolt pattern…

view full answer...

Answer 9

Yes, the best option we can offer you to add fuel capacity is with the DeeZee Truck Bed Auxiliary Tank part #DZ91752X which should fit in the space you have between the cab and 5th wheel hitch no problem as it is only 9" deep. I don't have…

view full answer...

Answer 10

Thank you for purchasing from etrailer! You did a great job selecting compatible parts. When using Leaf Springs #e64SR with the #AP233 Equalizer Kit and the #H248 Hanger Kit, there should be 29-1/2" between the front and center hangers and…

view full answer...

Answer 11

As you have a Coleman Mach system currently you can use the Furrion Chill AC units from the list below. These will simply replace only the rooftop units and the controls and thermostats you currently have in place with control the new AC's. 13.5K…

view full answer...

Answer 12

Yes, you will be able to use the Furrion Chill HE RV Air Conditioner System #FR87FJ to replace all your Coleman MACH components. The thermostat will be able to control your furnace and run off the thermostat wiring your Coleman AC uses.

view full answer...

RhinoFLEX and RhinoEXTREME adapters the same?

Product Page this Question was Asked From

Featured Help Information

Miscellaneous Media

Continue Researching