Trailer Hub for a Boat Trailer with Inner Bearing L68149 and Outer Bearing L44649
Question:
I need to fine a hub for my boat trailer. The bolt pattern is 5 on 4 1/2. The inner bearing: L68149. outer bearing L44649. Can someone help me, please.
asked by: Kun B
Expert Reply:
We have several trailer hub options with the 5 on 4-1/2 bolt pattern and bearings L68149 and L44649. For an idler hub there are 2 options. We have a standard hub, # 84545BX, which includes the bearings, races, seal, grease cap, and lug nuts.
There is also an EZ lube version of the same hub if you have an EZ lube axle. It is # 84545UC1-EZ. It also includes the bearings, races, seal, grease cap, and lug nuts.
Products Referenced in This Question
Dexter Trailer Idler Hub Assembly for 3,500-lb Axles - 5 on 4-1/2
- Trailer Hubs and Drums
- Hub
- Standard
- L68149
- L44649
- For 3500 lbs Axles
- 1/2 Inch Stud
- 5 on 4-1/2 Inch
- 13 Inch Wheel
- 14 Inch Wheel
- 14-1/2 Inch Wheel
- 15 Inch Wheel
- 16 Inch Wheel
- 16-1/2 Inch Wheel
- Dexter
more information >
Dexter Trailer Idler Hub Assembly for 3,500-lb Axles - 5 on 4-1/2 - Pre-Greased
- Trailer Hubs and Drums
- Hub
- EZ Lube
- Pre-Greased
- Standard
- L68149
- L44649
- For 3500 lbs Axles
- 5 on 4-1/2 Inch
- 13 Inch Wheel
- 14 Inch Wheel
- 14-1/2 Inch Wheel
- 15 Inch Wheel
- Dexter
more information >
Product Page this Question was Asked From
Dexter Trailer Idler Hub Assembly for 2,200-lb Axles - 5 on 4-1/2
- Trailer Hubs and Drums
- Hub
- Standard
- L44649
- L44649
- For 2000 lbs Axles
- 1/2 Inch Stud
- 5 on 4-1/2 Inch
- 13 Inch Wheel
- 14 Inch Wheel
- 14-1/2 Inch Wheel
- 15 Inch Wheel
- Dexter
more information >
Featured Help Information
Miscellaneous Media
Continue Researching
- Q&A: How to Determine the Size of a Trailer Hub Assembly for Replacement
- Article: Most Popular Wheel Bearings
- Q&A: How to Tell if Trailer has a BT8 or BTR Spindle Installed
- Q&A: Which Hubs Can Be Used to Replace the Hubs on a UFP H-1062-3
- Q&A: Cross Referencing 10-9 Replacement Grease Seals for Aliner Trailer
- Q&A: What Is the Difference Between a BTR and BT8 Spindle
- Q&A: Is BoatBuckle Transom Tie Down Suitable for a Bass Tracker Pro Team 175 TX at 1,300 Pounds
- Article: Trailer Tire Sizing
- Article: How to Accurately Measure Trailer Leaf Springs
- Q&A: Difference Between an Idler Hub and a Hub/Drum
- Article: Replacing the Bearing, Races and Seals on a Trailer Hub
- Article: Where to Position the Trailer Axle?
- Article: Measuring a Trailer Tire
- Article: Slipper Spring Trailer Suspension System Review