Will Timbren System # TGMFK35C Fit 1995 Chevrolet Tahoe With Torsion Bar Front Suspension

Question:

vehicle: 1995 Chevrolet Tahoe Will the Timbren TGMFK35C front suspension enhacement kit work on my 1995 Tahoe 4x4 with torsion bar front suspension? If not, what might you recommend to help support a snow plow?

asked by: Dale B

Helpful Expert Reply:

The Timbren Front Suspension Enhancement System, part # TGMFK35C, will fit your 1995 Chevrolet Tahoe 4WD with torsion bar front suspension. The Timbren rubber springs will install in place of your factory bump stop. You will want to make sure that the suspension on your vehicle is in good working order before installing the Timbren kit.

The Timbren kit is designed to work on vehicles with a snow plow. The rubber springs will raise the front of the end of the Tahoe when heavy equipment, such as a plow, is attached. Headlight beams will be pointed in the right direction and tire wear will be reduced. If the plow is off center or has an extension, the hollow rubber springs will automatically compensate for this as well.

If you wanted to upgrade the rear suspension on your Tahoe the kit for the rear would be the Timbren Rear Suspension Enhancement System, part # TGMRYT4.

I am including a link to the installation instructions on the Timbren system.

expert reply by: Jeff D