bing tracking image
Q & A Icon

Wiring Harness to Install Redarc RED24FR Tow-Pro Liberty Brake Controller in 2011 Chevy Traverse  

Question:

Hello, Im looking to install a Redarc Tow Pro Liberty brake controller into my 2011 Chevy Traverse with car-specific adapter. Do i need to add diodes to the controller to prevent feedback into the controller? Thanks

0

Expert Reply:

If your Traverse has the factory 7-way, the only other part you'll need in addition to the # RED24FR Redarc Tow-Pro Liberty brake controller is the # RED27FR vehicle specific wiring harness that will join the control box to the factory brake controller connector under the dash. The connector is located under the dash between the e-brake pedal and steering column, as shown in the provided photo and at the 3:25 mark in the linked video.

According to Redarc, a diode isn't necessary.

You can mount the control knob in an un-used switch knockout on the dash, if there isn't one available, you can use a mounting bezel like # 331-TPSI-001 to dress up the appearance if you wish.

expert reply by:
0
Mike L
Brake Controller Connector Location 1st Gen Chevy Traverse
Brake Controller Connector Location 1st Gen Chevy Traverse
(click to enlarge)

Products Referenced in This Question



Product Page this Question was Asked From


Q & A Icon

Continue Researching

See More Q&A Expert Answers >>