Recommended Parts for Towing Camper Equipped With a 7-Way Connector With 2014 Dodge Grand Caravan

Question

Question:

Hi, first time travel trailer owner. We have a 2014 dodge grand caravan and will be towing a camper. The camper has a 7 pin connector, I wanted to ask what do we need to buy to connect it. I read so much informacion but Im confused about getting the 4 pin harness and then add the 7 pin connector, or if theres a 7 pin harness connector already. Also if we need any extras, like break controller, any other parts we may need, if you can send me a list I greatly appreciate it.

asked by: Lilia C

0

Expert Reply:

I'd be happy to shed some light on that for you.

Let's begin with a hitch, assuming you don't yet have one. I'd go with the Curt Class III # 13364 that you'd looked at.

For a connector i would go with the Curt T-Connector # C56331 for the 4-way connector.

And if your camper is equipped with brakes you will need a universal 7-way adapter # ETBC7. The Redarc Liberty # RED52VR is a great option. This particular kit comes with a universal wire harness.

You'll also need a ball mount like # C45336, a # PC3 hitch pin and for a trailer ball, use # A-90 for a 2 inch ball or # A-6 for a 2-5/16 inch ball.

I've linked to installation details and an install video for the hitch.

expert reply by: Mike L

0

Answer 1

To install a brake controller in a 2016 Chevy Colorado you will have to wire the controller to the 4 wires under the dash of the truck like in the video you mentioned (that is also linked.) There won't be an adapter available for this vehicle…

view full answer...

Answer 2

You can have a 2-5/16 inch hitch ball on either a 1 inch or 1-1/4 inch shank. The nut on a hitch ball with a 1-1/4 inch shank takes a wrench with a 1-7/8 inch socket. A hitch ball with a 1 inch shank will take a wrench with a 1-1/2 inch socket. You…

view full answer...

Answer 3

You want the trailer to be as level as possibel when towing. To figure out the correct rise or drop you need with your 2004 Honda Pilot measure from the ground to the inside top of the trailer hitches opening with the vehicle parked on level ground.…

view full answer...

Answer 4

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 5

Actually, the P3 now has the upgraded axis accelerometer like the P2. The Tekonsha P3 Trailer Brake Controller #90195, will work with both electric over hydraulic brakes on the trailer as well as electric brakes. It has a menu option on the display…

view full answer...

Answer 6

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 7

The best brake controller option to go with is one that activates the brakes proportionally instead of time delayed. A proportional brake controller will activate the trailer brakes at the same time and with the same intensity as the tow vehicle…

view full answer...

Answer 8

The Redarc Tow-Pro Liberty #RED24FR is the way to go over the Elite #RED44FR as you get the nicer functions of the Elite at a lower price. The Elite has the ability to be the more preferred proportional style of controller as well as a time-delayed…

view full answer...

Answer 9

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 10

To install the Tekonsha Prodigy P3 Trailer Brake Controller #90195 in your Freightliner S2RV chassis the wiring is behind the kick panel in the drivers compartment. There is not a connector on the wires, they are simply terminated with tape. You will…

view full answer...

Answer 11

The trailer brakes work on a separate circuit than the lights. You have a couple of options to control the electric brakes on the trailer. One option is to use an air over electric brake control, #HA100400C. This unit connects to the air brakes on…

view full answer...

Answer 12

If you have a vehicle specific wiring harness for a brake controller then that would indicate that you have a factory tow package and subsequently would already have a 7-way at the back of your vehicle. The universal 7-way connector #ETBC7 is meant…

view full answer...

Recommended Parts for Towing Camper Equipped With a 7-Way Connector With 2014 Dodge Grand Caravan

Products Referenced in This Question

Product Page this Question was Asked From

Featured Help Information

Instructions

Miscellaneous Media

Continue Researching