Recommended Trailer Hitch Receiver With The Most Ground Clearance For 2019 Jeep Renegade
Question:
I have a jeep renegade sport 2019 Im looking for a hitch with ball mount , something that I could mount throw the center of the rear bumper , not underneath
asked by: Luis
Expert Reply:
I have an option that you mentioned you weren't looking for, but there is not a trailer hitch receiver that mounts through the rear bumper of your 2019 Jeep Renegade Sport.
Instead I recommend the Draw-Tite Trailer Hitch Receiver - Custom Fit - Class II - 1-1/4" # 36587 as measures 12" from the ground to the top inside edge of the receiver tube which is the highest ground clearance out of all of the options for your Jeep. This hitch has a 300lb tongue weight rating and 3500lb trailer weight rating, but you will want to check the owner's manual for your Jeep to find its towing capacity and use the lower rating between the hitch and vehicle.
For a compatible ball mount you would want the Drawbar # 36071, and either the 1-7/8" hitch ball # 19256, or 2" hitch ball # 19258 to match the coupler on your trailer.
Lastly to tow a trailer you will also need a vehicle wiring harness like the # C56274 to power the trailers lights.
I included videos for each of the products for you to take a look at.
Products Referenced in This Question
1-7/8" Hitch Ball - 3/4" Diameter x 1-9/16" Long Shank - Chrome - 2,000 lbs
- Trailer Hitch Ball
- Trailer Hitch Ball
- Standard Ball
- Chrome-Plated Steel
- 1-7/8 Inch Diameter Ball
- 1-9/16 Inch Shank Length
- 3/4 Inch Diameter Shank
- 2000 lbs GTW
- Class I
- Class II
- Draw-Tite
more information >
2" Hitch Ball - 3/4" Diameter x 1-9/16" Long Shank - Chrome - 3,500 lbs
- Trailer Hitch Ball
- Trailer Hitch Ball
- Standard Ball
- Chrome-Plated Steel
- 2 Inch Diameter Ball
- 1-9/16 Inch Shank Length
- 3/4 Inch Diameter Shank
- 3500 lbs GTW
- Class I
- Class II
- Draw-Tite
more information >
Drawbar for 1-1/4" Hitch - 2-5/8" Rise, 3-1/4" Drop - 7-3/16" Long - 3.5K
- Trailer Hitch Ball Mount
- Fixed Ball Mount
- No Ball
- 3/4 Inch Ball Hole Diameter
- Steel Shank - Gloss Black
- Drop - 3 Inch
- Rise - 2 Inch
- Fits 1-1/4 Inch Hitch
- 3500 lbs GTW
- Class II
- Draw-Tite
more information >
Curt T-Connector Vehicle Wiring Harness with 4-Pole Flat Trailer Connector
- Custom Fit Vehicle Wiring
- Trailer Hitch Wiring
- Powered Converter
- Custom Fit
- 4 Flat
- CURT
more information >