Recommended Landing Gear And Stabilizing Jacks For 29000lb 5th Wheel Trailer
Question:
I have a 5th wheel trailer that I am wanting to install six landing gear on it. The trailer will weigh about 22,000lbs. This will act as a food truck so there will be another 7,000lbs. worth of equipment also installed. I would like a quote for this. Let me know if you have any questions for me. Thanks
asked by: Zach B
Expert Reply:
To stabilize your 5th Wheel trailer that you will use as a food truck weighing around 29000lbs you will want to start with the Stromberg Carlson Manual Landing Gear Set - Weld On - 34-7/8" Lift - 8,000 lbs # LG-183708 to support the front of your trailer.
With that installed you will also need 4 of the etrailer Scissor Jacks with Handle - 24" Lift - 5,000 lbs # e99012 which will give you the stabilization you are looking for when setting up the trailer as a food truck. These can be bolted or welded to the frame of your trailer.
Keep in mind that these stabilizers will not lift your trailer, and are designed to help support the trailer. Using these products to lift the trailer would overload the components and lead to damage.
You can find the current price of each of the products mentioned by visiting the product pages using the included links.
I included videos for both of the products mentioned for you to take a look at.
![Samuel C](https://images.etrailer.com/static/images/catg/people/2240_tn.jpg)
Products Referenced in This Question
etrailer Scissor Jacks with Handle - 24" Lift - 5,000 lbs - Qty 2
- Camper Jacks
- Fifth Wheel Camper
- Pop Up Camper
- RV Motorhome
- Teardrop Camper
- Travel Trailer
- Stabilizer Jacks
- Steel
- 4001 - 5000 lbs
- Scissor Jack
- 24 Inch Lift
- Bolt-On
- Weld-On
- 2 Jacks
- etrailer
more information >
Product Page this Question was Asked From
Stromberg Carlson Manual Landing Gear Set - Weld On - 34-7/8" Lift - 8,000 lbs
- Camper Jacks
- Fifth Wheel Camper
- Leveling Jacks
- Stabilizer Jacks
- Steel
- 7001 - 8000 lbs
- Landing Gear
- Sidewind Jack
- 35 Inch Lift
- Weld-On
- 2 Jacks
- Stromberg Carlson
more information >
Featured Help Information
Instructions
Miscellaneous Media
Continue Researching
- Q&A: How to Find the Correct Replacement Lead Leg for 5th Wheel Landing Gear
- Q&A: Does etrailer Bolt-On Swivel Mounting Plate Fit Jack TJP-5001S-B
- Q&A: Replacing ADTH 1RV-200 Landing Gear Motor
- Q&A: Replacement Landing Gear for 1993 Coachmen Catalina
- Q&A: Is There a Replacement for a Trimark 030-0900 Door Latch
- Q&A: How to Choose Replacement Landing Gear for 5th Wheel Trailer
- Q&A: How to Know if Landing Gear Set # RVLG-8HDL Will Fit 2001 Sunnybrook 31BWFS
- Article: Best Landing Gear
- Article: Wiring Trailer Lights with a 7-Way Plug (It's Easier Than You Think)
- Article: How to Choose a Bike Rack for a Motor Home or RV
- Article: Replacing RV Awning Fabric: Your Step-by-Step DIY Guide
- Article: How to Measure for Travel Trailer and Fifth Wheel Steps
- Article: Replacing the Bearing, Races and Seals on a Trailer Hub
- Article: 30-Amp and 50-Amp RV Service: What's the Difference?