bing tracking image
Q & A Icon

High Capacity Hitch and Weight Distribution System Recommended for 2008 Ford Van  

Question:

Is this shank compatible with WD/SC system RP66075? Where is the Hitch with 1200# WD rating and a 2.5inch receiver? Or is there a similar shank for 2inch receiver that is compatible with RP66075?

0

Expert Reply:

There is not an available Class V hitch with a 2-1/2 inch receiver available for the 2008 Ford Van.

The RP54977 would indeed be compatible with the Reese # RP66075 W/D system, but the system is only compatible with a 2-1/2 inch receiver.

The Draw-Tite Class IV hitch, part # 41906 has a 10,000 lb towing/1,000 lb TW capacity or 12,000 lb GTW/1,200 lb TW capacity when used with a weight distribution system. Keep in mind that this is the capacity of the hitch, the towing capacity of your van might be lower. You will need to abide by the capacity of the lowest rated component, whether it is the hitch or the vehicle itself.

For a trailer tongue weight not exceeding 1,200 lbs, I would recommend the Reese Strait-Line system, part # RP66084. The height adjustable weight distribution shank is included, but the appropriately sized trailer ball with a 1-1/4 inch diameter shank is sold separately. For a 2-5/16 inch ball, use part # 19286.

If your trailer tongue weight is higher than 1,200 lbs, I would recommend using a vehicle with a higher towing capacity.



expert reply by:
0
Mike L

Products Referenced in This Question





Video/Article/FAQ this Question was Asked From

Article or Video