Parts Needed To Add 7-Way And 4-Way Connector To 2002 Toyota Tundra W/ Factory 4-Way Connector
Question:
I have a 2002 Toyota Tundra SR5 access cab with factory tow package and a 4 way connector and would like to add a CURT 4 way/7 way RV combo. What part number would you recommend? Thanks
asked by: Keith
Expert Reply:
I have another option for you, but there is not a plug and play 4-way and 7-way connector for your 2002 Toyota Tundra with the factory 4-way connector.
Instead you will need to install the # ETBC7 kit which will plug into your factory 4-way connector, and only require you to make a few more connections as shown in the included video of this kit being installed on a 2002 Toyota Tundra. This will give you the 7-way and 4-way connector you are looking for.
If you are also needing a trailer brake controller I highly recommend the Tekonsha Prodigy P3 # 90195 which is a top of the line trailer brake controller that is very popular due to it being extremely reliable, having an easy to read LCD screen, and built in diagnostics that are easy to read and understand.
To install the # 90195 you will need to use a circuit tester like the # PTW2993 to find the wire coming from the cold side of your stop light switch. This wire will only have power when the brakes are applied. Once you have found this wire you will make the following connections:
Black wire to positive terminal over vehicle battery with the 20-amp fuse if trailer has 1-2 braking axles, or 30 amp circuit breaker if trailer has 2-4 braking axles. (Fuses included with # ETBC7)
White wire to ground
Blue wire to blue wire of # ETBC7
Red wire to cold side of stop light switch.
I included videos for both of the products mentioned for you to take a look at.
Products Referenced in This Question
Tekonsha Prodigy P3 Trailer Brake Controller - 1 to 4 Axles - Proportional
- Trailer Brake Controller
- Proportional Controller
- Electric
- Electric over Hydraulic
- Automatic Leveling
- Under-Dash Box
- Dash Mount
- Up to 4 Axles
- LCD Display
- Up to 360 Degrees
- Tekonsha
more information >
Product Page this Question was Asked From
Universal Installation Kit for Trailer Brake Controller - 7-Way RV and 4-Way Flat - 10 Gauge Wires
- Accessories and Parts
- Trailer Brake Controller
- Installation Kits
- etrailer
more information >
Featured Help Information
Instructions
Miscellaneous Media
Continue Researching
- Article: Brake Controller 7- and 4-Way Installation Kit (ETBC7)
- Article: Brake Controller Installation: Starting from Scratch
- Article: Wiring Trailer Lights with a 7-Way Plug (It's Easier Than You Think)
- Article: Trailer Wiring Diagrams
- Q&A: What is the Difference Between a 4-Way and 7-Way Trailer Connector
- Article: Towing a Trailer? Let's Talk About Brake Controllers
- Article: How to Choose the Right Trailer Hitch Class
- Article: How to Measure for Trailer Hitch Drop
- Q&A: What is the Difference Between a Class II and a Class III Hitch?
- Q&A: Where Do the Wires on the Universal Install Kit for Trailer Brake Controllers Get Installed?
- Q&A: 2022 Toyota Highlander Wiring for a 7-Way Blade Connector
- Q&A: Should I Get a Proportional or Time-Delayed Brake Controller
- Q&A: Parts Needed to Tow Trailer With Brakes Using 1992 Dodge D250
- Q&A: 4-Flat Trailer Wiring For 2024 Jeep Wrangler With Tow Bar Wiring