Recommended Cargo Carrier For 2010 Nissan Altima With 1-1/4 Trailer Receiver
Question:
Will this carrier fhg77zr work on a nissen altima?
asked by: Sandra F
Expert Reply:
The Flint Hill Goods 30x50 Wheelchair Carrier # FHG77ZR that you mentioned requires a 2" hitch receiver opening. The only receivers available for your 2010 Nissan Altima are 1-1/4", such as the Draw-Tite Trailer Hitch Receiver # 24796. In order to use the Flint Hill Goods carrier you will need to use Hitch Adapter 1-1/4" to 2" # HTAD; this will convert your 1-1/4" receiver to 2". Keep in mind that this adapter will reduce your hitch's tongue weight capacity by 50%, so if you are using the Draw-Tite receiver # 24796 with a max tongue weight of 200lbs you will now have a max tongue weight of 100lbs. The Flint Hill Goods carrier weighs 80lbs, which leaves you with only 20lbs to be added onto the carrier. I doubt that this will meet your needs, we need a better solution.
Your only other option is to go with a cargo carrier that fits a 1-1/4" receiver opening. I would look at the 20x47 Reese Cargo Carrier # 63155. This does not require a hitch adapter, so your trailer hitch receiver will not have any reduced capacity when using a cargo carrier like this. I have attached demonstration videos for these products.
Products Referenced in This Question
Draw-Tite Sportframe Trailer Hitch Receiver - Custom Fit - Class I - 1-1/4"
- Trailer Hitch
- Custom Fit Hitch
- Class I
- 200 lbs TW
- 2000 lbs GTW
- 1-1/4 Inch Hitch
- Visible Cross Tube
- Draw-Tite
more information >
20x47 Reese Cargo Carrier for 1-1/4" Hitches - Steel - 300 lbs
- Hitch Cargo Carrier
- Flat Carrier
- Fixed Carrier
- 21 Inch Wide
- Standard Duty
- Fits 1-1/4 Inch Hitch
- 49 Inch Long
- Steel
- Reese
more information >
Hitch Adapter 1-1/4" to 2" Trailer Hitch Receiver
- Hitch Adapters
- Hitch Expander
- Bike Racks
- Cargo Carriers
- Hitch Mounted Accessories
- 7-1/4 Inch Extension
- Fits 1-1/4 Inch Hitch
- 1-1/4 Inch to 2 Inch
- Brophy
more information >
Product Page this Question was Asked From
Flint Hill Goods 30" x 50" Wheelchair Carrier w/ 48" Ramp - 2" Hitch
- Hitch Cargo Carrier
- Carrier with Ramp
- Wheelchair Carrier
- Folding Carrier
- 30 Inch Wide
- Heavy Duty
- Fits 2 Inch Hitch
- 50 Inch Long
- Steel
- Flint Hill Goods
more information >
Featured Help Information
Instructions
Miscellaneous Media
Continue Researching
- Q&A: How Much Does The Flint Hill Goods 30" x 50" Wheelchair Carrier w/ 60" Ramp # FHG99ZR Weigh?
- Q&A: Why is the Flint Hill Goods 30x50 Wheelchair Carrier Not RV Approved
- Q&A: Can Sprayer Be Added to Dometic Part-Time RV Toilet
- Q&A: Recommended Replacement For A JVR9000R RV Stereo System With Three Cameras
- Article: Most Popular Wheel Bearings
- Q&A: Can The Basket Of The Flint Hill Goods Cargo Carrier With Ramp Be Reversed To The Driver's Side
- Q&A: Trailer Hitch Recommendation for a P30 Service Body Truck
- Q&A: Possible Hitch to Fit 1995 Chevrolet P30
- Article: How to Choose the Right Trailer Hitch Class
- Article: How to Carry Bikes While Towing a Travel Trailer
- Article: My Trailer Hitch Doesn't Fit
- Article: How to Choose a Hitch-Mounted Bike Rack
- Article: Trailer Hitch Receiver Sizes
- Article: Choosing the Right Suspension Kit for Your Truck and Trailer