Recommended Ball Mount With 1 Rise For 2017 Nissan Frontier
Question:
I have a 17 ground to top inside of a 2017 Nissan Frontier hitch receiver. The tear trailer spec for ball height from ground is 17-18. What ball mount should i buy. Thanks
asked by: Barry C
Expert Reply:
Since your receiver height is 17" and your coupler height is about 17-18", you will be fine with a no-rise ball mount or a 1" rise ball mount. I recommend going with the Brophy Ball Mount - Aluminum - 8,000 lbs # EA20, which is 9-3/4" from center of hitch pin hole to center of ball hole and is also 1" rise / 2" drop.
You will also need a hitch ball. For 1-7/8" go with # C40002, for 2" go with # 40038, for 2-5/16" go with # C40007.
I have attached demonstration videos for the ball mounts mentioned above.
Products Referenced in This Question
1-7/8" Hitch Ball - 1" Diameter x 2-1/8" Long Shank - Chrome - 3,500 lbs
- Trailer Hitch Ball
- Trailer Hitch Ball
- Standard Ball
- Chrome-Plated Steel
- 1-7/8 Inch Diameter Ball
- 2-1/8 Inch Shank Length
- 1 Inch Diameter Shank
- 3500 lbs GTW
- Class III
- CURT
more information >
2-5/16" Hitch Ball - 1" Diameter x 2-1/4" Long Shank - Chrome - 10,000 lbs
- Trailer Hitch Ball
- Trailer Hitch Ball
- Standard Ball
- Chrome-Plated Steel
- 2-5/16 Inch Diameter Ball
- 2-1/4 Inch Shank Length
- 1 Inch Diameter Shank
- 10000 lbs GTW
- Class III
- CURT
more information >
Brophy Ball Mount - 1" Rise, 2" Drop - 9-3/4" Long - Aluminum - 8,000 lbs
- Trailer Hitch Ball Mount
- Fixed Ball Mount
- No Ball
- 1 Inch Ball Hole Diameter
- Aluminum Shank - Silver
- Drop - 2 Inch
- Rise - 1 Inch
- Fits 2 Inch Hitch
- 8000 lbs GTW
- Class IV
- Long Shank
- Brophy
more information >
Product Page this Question was Asked From
2" Hitch Ball - 1" Diameter x 2-1/4" Long Shank - Chrome - 12,000 lbs
- Trailer Hitch Ball
- Trailer Hitch Ball
- Standard Ball
- Chrome-Plated Steel
- 2 Inch Diameter Ball
- 2-1/4 Inch Shank Length
- 1 Inch Diameter Shank
- 12000 lbs GTW
- Class III
- CURT
more information >
Continue Researching
- Article: How to Measure for Trailer Hitch Drop
- Q&A: Recommended Weight Distribution Hitch For A Jayco Jay Flight SLX 174BHW
- Article: Ball Mount Basics: Weight Capacity, Class, and Size
- Q&A: Parts Needed to Add Brake Controller to 2024 Toyota Sienna Platinum
- Article: Brake Controller 7- and 4-Way Installation Kit (ETBC7)
- Q&A: Replacing A Lippert A-Frame Jack For A Side-Mount Swivel Tongue Jack
- Article: Enjoy The 2024 Eclipse With Harvest Hosts
- Article: 2 Steps for Finding the Right Weight Distribution Hitch Size
- Article: Best Bike Racks for Electric Bikes
- Article: How to Choose the Right Trailer Hitch Class
- Q&A: Can a 2021 Honda Passport Elite Pull a Sol Horizon Camper?
- Q&A: Do I need a Weight Distribution System to Tow a 3,000 lb Trailer with a 2022 Toyota Tacoma
- Q&A: How Should a Friction Bar Sway Control System be Adjusted
- Q&A: What is the Difference Between a 4-Way and 7-Way Trailer Connector