Recommended Timbren Axle-Less Trailer Suspension With Hubs For 3,500 Lbs

Question:

Do you have an axle this size? Thanks 3700# Torsion Axle Vbend Disc Brake 5 lug hub 94.3 Hub Face 72 outside bracket 4.32 tall bracket 9.75” rotor Zero degree

asked by: Chalie A

Expert Reply:

I do have an excellent solution for you, however, we do not carry torsion axles. What we do have is an axle-less suspension setup that will allow each wheel to move independently as a torsion axle would. I recommend going with the Timbren Axle-Less Trailer Suspension System w Hubs - Straight Spindle - 5 on 4-1/2 - # A35RS545.

This system uses a progressive-rate spring to absorb road shock and a rebound spring to minimize trailer bounce, rattle and bottoming out. This comes with hubs that are 5 on 4-1/2", which sounds like the bolt pattern you are looking for, and it is compatible with brakes. This setup will replace your factory suspension and is rated at 3,500 lbs. You will need to install a 2" x 2" steel bar and fit it into the opening on the timbren axle-less suspension; this bar is not included. I have attached a detailed installation video for this axle-less suspension setup.

expert reply by: Andrew N