bing tracking image
Q & A Icon

Replacement 6.90-9 Wheels And Tires For Trailer  

Question:

I am looking to replace the wheels and tires on my trailer. RIght now, I have Carlisle Trail USA 6.90-9 tires on it. My wheels are 5x5.5 but they have a 5 hub. I could go to a 10 wheel if I need to, I have room. But, I must have that 5 hub. I dont see any intel here on the hub sizes for your wheels. My wheels are 9" Lugs are 5 on 5.5 4" pilot hole Please advise. Thanks

0

Expert Reply:

Your 6.90-9 tires are an older style that we only carry replacement tires for - # AM10040, but I do have a solution for a close matching wheel and tire combination.

Your current wheels/tires measure 21.1" in diameter; the closest we have to that is a Kenda Loadstar 205/65-10 Bias Trailer Tire # AM3H453, which is 20.5" in diameter and 8.3" in width. This will only be approximately 1/4" shorter than your current setup.

This wheel/tire combo has the 4" pilot hole and 5x5.5 lug pattern that you need.
This has a maximum load capacity of 1,100 lbs at 50 psi per wheel/tire.

While this setup has a very slight difference in size compared to your current setup, it is still a good idea to measure and make sure that this will fit your trailer.

expert reply by:
0
Andrew N

Products Referenced in This Question


Product Page this Question was Asked From


Q & A Icon

Continue Researching

See More Q&A Expert Answers >>