Compatible Rails for Reese 30031 Hitch on 2019 Ram 1500 Classic
Question:
Have Reese 30031 14k 5th wheel hitch and need rails for 2019 RAM classic 5 1/2’ bed, suggestions.
asked by: Steve C
Expert Reply:
The Reese 30031 is nice in that it is designed to fit any vehicle with a set of industry standard fifth wheel rails. The correct fit for your truck is Reese Quick-Install Custom Installation Kit # RP50142-58.
I highly recommend these rails since they are custom fit for your 2019 Ram 1500 Classic. This means that the brackets are vehicle specific to minimize any drilling or measuring. However, if you want a slightly less expensive option, then the Reese Semi-Custom Base Rail and Installation Kit # RP30035-523 is also a good fit. This will involve a little more drilling into your truck bed.
Since you have a short bed 5-1/2' truck bed, the Reese Sidewinder 5th Wheel King Pin with Rotating Turret # RP34FR is required for turning clearance. This pin box replaces the Lippert 1716, 1116, and the 0115 pin boxes and others you can find in the description. It has a rotating turret so the pin box locks at the hitch and rotates at the trailer. Your model number should be located on your current pin box so you want to make sure this is the direct replacement. This will give enough clearance for a complete 90 degree turn with your short bed.
Products Referenced in This Question
Reese Semi-Custom Base Rail and Installation Kit for 5th Wheel Trailer Hitches - Ram
- Fifth Wheel Installation Kit
- Semi-Custom
- Above the Bed
- Reese
more information >
Reese Sidewinder 5th Wheel King Pin with Rotating Turret - 20,000 lbs
- Fifth Wheel King Pin
- Upgraded Pin Box
- Provides Turning Clearance
- 20000 lbs GTW
- Rotating Turret
- Fabex 663
- Fabex 665
- Lippert 0719
- Lippert 1621
- Lippert 1621HD
- M and M 663
- M and M 665
- Lippert Rhino
- Reese
more information >
Product Page this Question was Asked From
Reese Quick-Install Custom Installation Kit w/ Base Rails for 5th Wheel Trailer Hitches
- Fifth Wheel Installation Kit
- Custom
- Above the Bed
- Reese
more information >
Featured Help Information
Instructions
Miscellaneous Media
Continue Researching
- Q&A: Correct Gen-Y Pin Box to Replace a MORryde RPB72-1716
- Article: Ram Trailer Tow Prep Package
- Article: Sidewinder with Rotating Turret for Short Bed Pickups
- Q&A: Weight Distribution Recommendation for 15k Trailer Towed with 2-1/2 inch Hitch
- Article: 4 Steps to Choosing Your 5th Wheel Pin Box
- Article: Trailer Tire Sizing
- Q&A: Replacement Lippert 113407 Power Stabilizer Jack Motor for 2013 Jayco Eagle 308RET Travel Trailer
- Q&A: Replacement Stabilizer Jack Need for Lippert Model 113407
- Q&A: Reese Goose Box Recommendation to Replace MORryde Pin Box SPB72-1621LD
- Q&A: Replacing a Lippert 1621 Pin Box with a MoRryde RPB72-1621SHD-TA-06
- Q&A: Correct Solera RV Slide-Out Awning Measurements
- Article: The Best 5th Wheel Hitches
- Article: Adapters for Towing a 5th Wheel Trailer with a Gooseneck Hitch
- Article: Gooseneck Trailer Hitch Information and Review