Best Equalizer Upgrade Kit for an Equalizer 5-3/4" Across and 2" Tall
Question:
I am looking at getting the road armor shock absorbing equalizing kit and want to make sure the dimensions will work with what I have. The distance from center to center on my original equalizer is 5 3/4 inched. The height is 2 inches. Will this work?
asked by: Chris J
Expert Reply:
We have what you need.
The Road Armor Shock Absorbing Equalizer Kit, part # LC696740, is not it, though. This kit has measurements of 6" between the side holes and 3-1/2" high, which are too far off from your original equalizer's measurements to work well.
Instead, I recommend the Dexter E-Z Flex Suspension Kit, part # K71-652-00. They measure 5-5/8" across and 2" tall, making them almost an exact match for your current equalizer. The 1/8" difference across is perfectly acceptable. I've linked to a video installation of this kit for your reference.
Keep in mind that though these state they are for 6000-pound axles, that has more to do with the axle capacity that equalizers of this size are typically associated with. Your axles don't have to have a capacity exactly at 6000 pounds.
Products Referenced in This Question
Dexter E-Z Flex Suspension Kit - Double-Eye Springs - Tandem Axle - 6,000 lbs
- Trailer Leaf Spring Suspension
- Equalizer Upgrade Kit
- Boat Trailer
- Camper
- Car Hauler
- Snowmobile Trailer
- Utility Trailer
- Double Eye Springs
- 5-5/8 Inch Long
- Tandem Axle
- Dexter
more information >
Product Page this Question was Asked From
Road Armor Shock Absorbing Equalizer Kit - Tandem Axle - Qty 2
- Trailer Leaf Spring Suspension
- Equalizer Upgrade Kit
- Boat Trailer
- Camper
- Car Hauler
- Snowmobile Trailer
- Utility Trailer
- 3500 lbs - 8000 lbs
- Double Eye Springs
- 6 Inch Long
- Tandem Axle
- Lippert
more information >
Continue Researching
- Q&A: Recommended Suspension Enhancements for a 2022 Grand Design Imagine 2910BH
- Q&A: Comparing Blue and Yellow Road Armor Shock Absorbing Equalizer Kit
- Q&A: Is Road Armor Equalizer Upgrade Better Than MORryde
- Article: How to Accurately Measure Trailer Leaf Springs
- Article: Trailer Tester Battery Replacement for Part Number 8010
- Article: Double-Eye Trailer Suspension System Review
- Article: Most Popular Wheel Bearings
- Article: 5 Tell-Tale Signs It’s Time to Replace Your Trailer’s Leaf Springs
- Article: How to Raise Your Travel Trailer Height
- Q&A: Comparing Equa-Flex and Road Armor Equalizers For 2000 Forest River WIldwood W/ 5200lb Axles
- Q&A: Will MORryde Upgraded HD Shackle Kit Fit 2020 Grand Design 2670MK
- Q&A: Equalizer Upgrade Fit For 2018 Grand Design Momentum 350M
- Q&A: Equalizer Upgrade Option For Montana 3831MS
- Article: Trailer Tire Sizing