Will the Bars Fall Out of the Reese Steadi-Flex Weight Distribution System With Sharp Turns

Question:

Can you make too sharp a turn causing bar to come out of cam

asked by: Mike H

Expert Reply:

In regards to the Reese Steadi-Flex Weight Distribution System like part # RP66560, you can make sharp turns without worrying about the spring bars falling off the frame brackets. The brackets can be installed anywhere from 27" to 32" back from the center of the coupler. If you foresee sharp turns then the closer to the 27" mark you are, the better off you will be but even at the 32" mark the bars should not fall out of the brackets.

expert reply by: Conner L