What Are the Dimensions of the Ram Square 2-Speed Jack with Crank
Question:
Can you please send me some dimensions for your TJD2SP-12000SP-F? specifically, what is the width of the outer tube? I have to weld something to this so i need to know. Any chance you have some CAD models .step or .stp files you could send me too? We are using this product in one of our machines. As many dimensions as you can send the better! Thanks,
asked by: John F
Helpful Expert Reply:
I do have an answer for you, but we do not have technical drawings for the # TJD2SP-12000SP-F. However, I can tell you that the outer tube is 4" wide and the inner tube is 3-1/2" wide. I've also listed below a number of other dimensions that are also available on the product page, towards the bottom.
Height:
28" Retracted
40-1/4" Extended
Total lift: 25-7/8"
Screw travel: 12-3/8"
Drop leg travel: 13-1/2"
Lift capacity: 10,000 lbs
Support capacity: 12,000 lbs
Outer tube width: 4"
Inner tube width: 3-1/2"
Footplate dimensions: 8-1/4" long x 8" wide
Adjustment hole spacing on drop leg: 3-3/8" from center of hole to center of hole
There is also a review video of this jack attached for you that visualizes many of these dimensions.
Product Page this Question was Asked From
Square 2-Speed Jack w/ Crank - Drop Leg w/ Spring Return - Sidewind - 25-7/8" Lift - 10K
- Trailer Jack
- Car Hauler
- Enclosed Trailer
- Fifth Wheel Trailer
- Gooseneck Trailer
- Utility Trailer
- Leveling Jacks
- Tongue Jacks
- Steel
- 9001 - 10000 lbs
- Sidewind Jack
- 26 Inch Lift
- Weld-On
- With Rectangle Foot
- etrailer
more information >
Continue Researching
- Q&A: Can the Square 2-Speed Jack w/ Crank Be Used In Tandem
- Article: Trailer Wiring Diagrams
- Q&A: Parts Needed For Installing Trailer Brakes On a Yacht Club Single 3,500LB Axle Pontoon Boat Trailer
- Article: Wiring Trailer Lights with a 7-Way Plug (It's Easier Than You Think)
- Q&A: Dexter Axle Hub Conversion for 14.5 Inch or 15 Inch Wheels on Equipment Trailer
- Q&A: Locating Replacement Trailer Hubs and Drums for Mobile Home Axle
- Q&A: How To Match Up Hub And Bearings For KH71744 On Trailer
- Q&A: Which Hub and Drums and Braking Assemblies Fit Tandem 6000lb Phillips/Dexter Axles?
- Q&A: Replacement Brake And Hub/Drum Assembly For Car Trailer With Kelsey Hayes Axles and 10 x 2.25 Brakes
- Article: Trailer Maintenance Schedule
- Article: Choosing the Right Suspension Kit for Your Truck and Trailer
- Article: 2023 Holiday Must Haves
- Article: Trailer Lighting Requirements
- Article: How to Choose the Right Trailer Hitch Class