Replacement Parts for Old Equalizer Brand Axle
Question:
I’m looking for brake kit and possibly bearings for an older equalizer axle, center to center on 4 backing plate bolts are 2.812”, inner bearing surface on spindle is 1.375, outer is 1.062” best I can tell, I have picture of receipts of equalizer axle model number if that would help, I want drums for 5x4.75 and all brakes w backing plates if possible. Thanks
asked by: Derek
Expert Reply:
Given the measurements you provided, is sounds like you're needing a # L44649 (1.063 ID) and a # LM48548 (1.375 ID) bearing. However, we don't offer a brake assembly compatible with the 2-5/16 inch mounting flange bolt pattern you specified, and none of the hub/drums we offer are compatible with the bearings that your spindles use.
If you can't find a compatible hub and brake assembly, your best bet would be to replace your existing axle with something that uses easier to find replacement parts. We do offer some off-the-shelf replacement axles, if you could reply with the hub face to hub face dimension, the center to center spacing between the spring seats and the axle capacity, I'd be happy to check to see if any of the replacements we offer would work for you.
Products Referenced in This Question
Replacement Trailer Hub Bearing - L44649
- Trailer Bearings Races Seals Caps
- Bearings
- Standard Bearings
- 1.063 Inch I.D.
- Bearing L44649
- Race L44610
- 3500 lbs Axle
- etrailer
more information >
Replacement Trailer Hub Bearing - LM48548
- Trailer Bearings Races Seals Caps
- Bearings
- Standard Bearings
- 1.375 Inch I.D.
- Bearing LM48548
- Race LM48510
- 2500 lbs Axle
- TruRyde
more information >
Product Page this Question was Asked From
Continue Researching
- Q&A: Compatibility of LED Hitch Cover FHG72VR with Wiring Harness 118384 on 2012 Chevy Colorado
- Q&A: What is the Diameter of Oil Cap Kit # RG04-250 and What Axles Does it Fit
- Q&A: Replacement for Dexter Grease Seal 010-019-00
- Q&A: Replacement Oil Cap for Oil Bath Trailer Hub w/ 3-3/4 Inch Outside Diameter
- Q&A: Recommendation for Replacement Shelby 5470A Winch with Large Drum Storage Capacity
- Q&A: Bearing Kit for Load Rite Boat Trailer with TDE Hub 46845
- Article: Most Popular Wheel Bearings
- Q&A: How to Determine Wheel Offset of Trailer Wheels
- Article: Trailer Wiring Diagrams
- Article: Trailer Tire Sizing
- Article: How to Choose the Right Trailer Hitch Class
- Article: Determining Trailer Tongue Weight
- Article: Which Sway Control Hitch is Right For Your Trailer?
- Article: Parts Needed to Add Electric Drum Brakes to a Trailer