Wiring Third Brake and Dome Lights in Truck Bed Cap on a 2008 Silverado Crew Cab
Question:
I am thinking of buying a used A.R.E Topper. How do I wire up the brake light and dome light that are on the topper?
asked by: Dale M
Expert Reply:
You will need to tap into the Silverado 7-Way trailer connector wiring (or find the wires tucked in around the spare tire if there is no trailer connector) to provide both brake light and dome light power. Please refer to the attached photo. These wires may be taped up together to protect them. I suggest you use a circuit tester like # PTW2979 to ensure proper identification of the wire functions. Often they are color coded but since there is no guarantee that the wire colors will correctly correspond to the functions, testing is recommended.
Usually the light blue wire in the Silverado harness carries the signal for a topper brake light. With a helper pressing the brake pedal, confirm the vehicle brake lights come on and apply the circuit tester to the light blue wire to check for a brake signal on this wire. If you detect a signal only when the brake pedal is pressed, you have the correct wire for the topper third brake light.
Next you will need to test to identify the wire carrying continuous 12-volt power from the battery; this wire will power the dome light. You will also need an automotive toggle switch to turn the light on and off. I suggest you check on the ARE website to identify your topper and confirm the amperage draw for its dome light, or you can inspect the light housing for this information. You can then select an appropriate on/off light switch at an auto parts store that can safely handle the current load for the dome light.
Products Referenced in This Question
Product Page this Question was Asked From
Pollak Replacement 7-Pole, RV-Style Trailer Connector Socket - Vehicle End
- Trailer Wiring
- Trailer Connectors
- Vehicle End Connector
- Plug Only
- 7 Round - Blade
- Pollak
more information >
Continue Researching
- Shop: Trailer Wiring
- Shop: T-One Vehicle Wiring Harness for Factory Tow Package - 4-Pole Flat Trailer Connector
- Shop: 3rd Brake Light Logic Module
- Video: Tekonsha T-One Vehicle Wiring Harness Installation - 2022 Honda Pilot
- Video: Review of Pacer Performance Vehicle Light Parts - Third Brake Light Logic Module - PP20-702
- Article: Trailer Wiring Diagrams
- Article: Brake Controller 7- and 4-Way Installation Kit (ETBC7)
- Article: Wiring Trailer Lights with a 7-Way Plug (It's Easier Than You Think)
- Article: How to Choose the Right Trailer Hitch Class
- Article: Brake Controller Installation: Starting from Scratch
- Article: How to Install a Brake Controller on Chevrolet / GMC 1999-2006 Pickups
- Q&A: Availability of InvisiBrake Installation Video on 1998 Jeep Wrangler
- Q&A: Replacement for Pollak PA66-MD40 Connector
- Q&A: Recommended Flat Towing Setup for a 2016 Jeep Wrangler Using a ReadyBrute Elite II Tow Bar
- Article: Flat Towing Package for 2011 Chevrolet HHR
- Q&A: Does B and W Gooseneck Hitch # BWGNRK1217 Fit 2017 Nissan Titan XD Long Bed
- Q&A: Blule Ox Baseplate For A Diesel 2020 GMC Sierra 3500 Denali
- Q&A: Replacement Connector for a Pollak PA66-MD40
- Q&A: How To Mount Pollak Connector PA66GF30