Dimension From Center of Rotor to Outer Edge of Caliper on Kodiak Disc Brake Kit # K2R526D
Question:
I need the max dimension of the rotor with the caliper installed to the top of the caliper ie: the dimension from the center of the 12inch rotor to the outer edge of the caliper.
asked by: Carl H
0
Expert Reply:
On the Kodiak Disc Brake Kit, part # K2R526D, the measurement from the center of the 12-inch rotor to the top of the caliper is about 6-3/4 inches. I am including a picture that will show that measurement.
The overall diameter of the rotor is 12.16 inches and the caliper sits about 3/4-inch above the edge of the rotor.
expert reply by:
Jeff D
0
Product Page this Question was Asked From
Kodiak Disc Brake Kit - 12" Rotor - 6 on 5-1/2 - Dacromet - 5,200 lbs to 6,000 lbs
- Trailer Brakes
- Disc Brakes
- Marine Grade
- 6 on 5-1/2 Inch
- Rotor
- 5200 lbs Axle
- 6000 lbs Axle
- 14-1/2 Inch Wheel
- 15 Inch Wheel
- 16 Inch Wheel
- Kodiak
more information >
Continue Researching
- Q&A: Replacement Breakaway Cable Repair Kit for Dexter DX7.5L A-60 Brake Actuator w Electric Lockout
- Q&A: Will The Kodiak Disc Brakes # KOD69FR Fit Load Rite Boat Trailer With 5,200LB Torsion Axles?
- Article: Parts Needed to Add Hydraulic Disc Brakes to a Trailer
- Q&A: Which Progressive Dynamics Converter for Lithium Batteries Should Replace PD9245C
- Q&A: Does 15" Americana Aluminum Mod Trailer Wheel Have a Max PSI Rating
- Article: How to Choose the Right Trailer Hitch Class
- Article: Trailer Drum Brakes vs. Disc Brakes: Making the Decision
- Article: How to Tell the Weight Rating of a Trailer Axle
- Q&A: Replacement Hub/Rotor and Bearings for Tie Down Engineering TDE46245
- Q&A: Replacement Bearing Kit & Leaf Springs For Dexter 5,200LB Axle On 2022 Grand Design Reflection 28BH
- Q&A: Recommended E-Z Lube Hub and Rotor Assembly for 6K Axles
- Article: Adding Electric Over Hydraulic Disc Brakes
- Article: How to Bleed Your Trailer Surge Brakes
- Article: 2023 Best Gifts for Outdoor Enthusiasts