bing tracking image
Q & A Icon

Wiring Harness for Installing Husky Quest Brake Controller on 2018 Toyota 4Runner  

Question:

Hello I have a Husky Quest proportional brake controller. I dont know if etrailer still carries these, but I need to find a wiring harness that will connect the Quest to my plug on my 2018 Toyota 4Runner

1

Helpful Expert Reply:

We've got you covered. The Husky Quest was manufactured by Hopkins, so you'd need one of their vehicle specific harnesses to install the controller in your 2018 Toyota 4Runner which is part # HM47815. This being said, Hopkins puts a different plug end on the controllers they made for Husky. You'll simply cut the plug off the end of the harness on your Quest, and cut off the black plug on the # HM47815 harness. Use butt connectors to join the wires from the harness to those on the controller color for color.

The harness would plug into the connector located above and to the left of the emergency brake pedal, just above the kick panel as shown beginning at the 4:30 mark in the linked video. The video shows a Tekonsha harness and a different controller, but it shows you exactly where the connector is located.

expert reply by:
1
Mike L

Video/Article/FAQ this Question was Asked From

Article or Video