Brake Controller For A 2010 Toyota Tundra With Factory 7 Pole
Question:
Hi, looking at the redarc trailer break controllers, which one is the right one to get? what harness do I need. 2010 Toyota Tundra? thanks,
asked by: Stephen L
Expert Reply:
To add a brake controller to you 2010 Toyota Tundra I recommend the Redarc Tow-Pro Elite Trailer Brake Controller - 1 to 3 Axles - Proportional Item # RED44FR and the Tekonsha Custom Wiring Adapter for Trailer Brake Controllers - Pigtail - Toyota Item # 3040-P and # 331-TPH-017. The plug should be located under the dash, left of the driver foot above the kick panel. It could potentially be taped to a bundle of factory wire.
I like this brake controller because it has user mode. User mode is designed for hauling a trailer off road. For instance you are off road going down a steep gravel hill, user mode allows your brakes on your trailer to receive the amount of brake pressure set on the dial, instantly.
This can sometimes be confused with the manual override in proportional mode. The manual override is designed for instance, sway situations, when you push the manual override in proportional mode, whatever number the dial is set at, it will gradually build the brake pressure to that number. If your trailer, being heavy, you apply the brakes while in proportional made, it may actually push the vehicle while going down the gravel hill. User mode keeps it from pushing the vehicle and the trailer brakes will actually help slow the vehicle because the brake pressure is instant.
Products Referenced in This Question
Tekonsha Plug-In Wiring Adapter for Electric Brake Controllers - Toyota and Lexus
- Accessories and Parts
- Trailer Brake Controller
- Wiring Adapter
- Plugs into Brake Controller
- Vehicle Specific
- Tekonsha
more information >
Redarc Tow-Pro Wiring Adapter for Tekonsha Brake Controller Harness
- Accessories and Parts
- Trailer Brake Controller
- Wiring Adapter
- Plugs into Brake Controller
- Universal
- Redarc
more information >
Product Page this Question was Asked From
Redarc Tow-Pro Elite Brake Controller - Dash Knob - 2 Braking Modes - 1 to 3 Axles - Proportional
- Trailer Brake Controller
- Proportional Controller
- Electric
- Electric over Hydraulic
- Automatic Leveling
- Dash-Mounted Knob
- Hidden
- Up to 3 Axles
- Indicator Lights
- Redarc
more information >
Featured Help Information
Instructions
Continue Researching
- Article: Brake Controller 7- and 4-Way Installation Kit (ETBC7)
- Article: Brake Controller Installation: Starting from Scratch
- Article: Towing a Trailer? Let's Talk About Brake Controllers
- Article: Trailer Wiring Diagrams
- Article: Wiring Trailer Lights with a 7-Way Plug (It's Easier Than You Think)
- Article: REDARC Tow-Pro Liberty vs Tow-Pro Elite
- Article: 2005-Current Volkswagen Touareg, Audi, or Porsche Cayenne
- Q&A: What is Difference Between Redarc Tow Pro Liberty and Elite
- Q&A: What is the Difference Between a 4-Way and 7-Way Trailer Connector
- Q&A: Comparing the Curt Spectrum Brake Controller to Redarc Tow-Pro Elite
- Q&A: Potential Brake Controller Harness Location on a 2023 Nissan Frontier
- Q&A: What is the Difference Between the Redarc Tow Pro Elite V2 and v3
- Q&A: Which Blue Ox Weight Weight Distribution System for Lance 1475 Trailer
- Q&A: Recommended Brake Controller for a 2022 Toyota Tacoma