Auto Leveling of Lippert Ground Control Troubleshooting Tips
Question:
2018 Ceder Creek Fifth Wheel with LCI Auto leveling. Moved trailer, went to auto level, front jacks ped all the way down, motor ran for a few seconds and then errored out, I can not get the system to raise jacks, is there a rest? I have the touch screen control panel inside the 5th wheel with the quick level on the outside of the trailer. The Screen is showing Jack Timeout. How do I level the trailer or what do i do?
asked by: Robert
Expert Reply:
To achieve a successful auto level with the Lippert Ground Control part # LC358590, you want to make sure you are trying to auto level on even ground. If you are trying to auto level on uneven ground you will have to relocate the trailer before trying. You may need to reset the zero point as well. If the zero point somehow got changed or was set incorrectly then the auto level feature will not work. The zero point is the programmed point that the trailer will return to each time the auto level feature is used. I have attached installation instructions to show you how to re-calibrate the zero point.
If the auto level sequence does not perform as described, then place the system in manual mode and test the jacks operations individually to make sure they operate properly. For example: press the front button to make sure it operates only the front jacks. The front, left, right and rear buttons activate the jacks in manual mode. If one of the jacks is not operating properly, it may need to be replaced.
Product Page this Question was Asked From
Lippert Ground Control 3.0 Electric 5th Wheel RV Leveling System w Touchpad - 4-Point Set
- Camper Jacks
- Fifth Wheel Camper
- Leveling Jacks
- Stabilizer Jacks
- Steel
- 10001 lbs or More
- Electric Jack
- 36 Inch Lift
- Bolt-On
- 4 Jacks
- Lippert
more information >
Featured Help Information
Instructions
Continue Researching
- Q&A: Is The Pad For The Replacement 22-1/2" Legs For The Ground Control 3.0 Welded Or Pinned In Place
- Q&A: Wiring Diagram and Fuse Location for the Lippert Ground Control 3.0 4-Point Leveling System
- Q&A: Wiring Guide for Installing 5th Wheel Landing Gear Motor Switch
- Q&A: Wiring Diagram for 5th Wheel Trailer Landing Gear with Red, Black, White, and Green Wires
- Q&A: Which Lippert Ground Control 3.0 System Is Recommended for a 37' Fifth Wheel
- Q&A: Drawing Schematic of Replacement I-Beam Jack Bracket for Lippert Ground Control 3.0
- Q&A: Dimensions of Lippert Ground Control 3.0 Jacks For Clearance on Keystone Cougar 28SGS
- Article: 4 Steps to Choosing Your 5th Wheel Pin Box
- Article: Gooseneck to 5th Wheel Adapters
- Article: Trailer Wiring Diagrams
- Article: Big Truck Big RV
- Article: Brake Controller 7- and 4-Way Installation Kit (ETBC7)
- Article: Best RV Roof Vents
- Article: Converting Your RV Water Heater to Tankless